Bulbs

To suit Edison™ pocket mini torches and security flashlights.

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Hand Arm Vibration Warning Labels

Safety adhesive labels are made from a gloss vinyl material. This allows the label to be attached to almost any surface; providing it is clean and grease free.
For most designs there are 2 sizes available: 51 x 27mm and 51 x 51mm.
NB. Other sizes are available on request.

Safety Adhesive Labels

Graphic Floor Signs and Identification Markers

A range of hi-visibility graphic floor signs. Each sign is 430mm in diameter and designed to highlight warnings or special requirements required by industry.

Each marker is printed onto the underside of a clear PVC film that has been selected to withstand the traffic in a modern warehouse and then laminated on the back surface with an aggressive permanent adhesive. They are suitable for use on dry, clean flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions. Although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is needed.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Suffolk Latches

Suffolk latches complete with long thumb bit.

Rechargeable Lantern Battery

996 size suitable for use with Uni-lite UK46, UK260 and UK200 lanterns, Eveready 510BK lamp, JSP navigator lamps and other products that operate from a PJ996/4R25 battery.
Mains Charger 240V input, 6V output.

PS-RB2

Polyurethane Tyre, Nylon Centre Wheel with Plain Bore

Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with "cushioned" tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 80C.

Swivel Type with Top Plate

Stainless Finish

Matlock Support Post and Chain Demarcation Barrier System

The Matlock support post and chain demarcation barrier system is lightweight and sturdy. It is ideal to cordon off an area or to form a channel for queuing. Suitable for warehouses, factories, offices, leisure venues etc.
Support posts, bases and chain packs sold separately.

10mm x 25m Chain Pack - Red & White

Red & white 10mm x 25m lightweight chain. Designed for use with Matlock chain support posts and bases.