COBAGRiP Stair Nosing

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Designed to help prevent slips on stairs.
Suitable for use on existing or new build steps.
Manufactured with a chamfered back edge for additional safety.
Bright colour for visibility meeting DDA requirements.
Product Height: 3mm GRP base overall 5mm.

Galvanised Large Bow Shackle

BS 3032 1958 with type "A" pins.

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

Bubble Mat

Manufactured from a hard wearing rubber compound. Bubble surface consistently stimulates blood circulation to reduce fatigue. Insulates against cold concrete floor. Ideal for use where an operator is standing in a static position for long periods. Available in two standard sizes complete with bevel edges and in the middle and end pieces for longer runs.
Please allow 5 - 7 days for delivery.

Upright Parking Post

The JSP upright parking post prevents vehicular access and protects designated parking areas manufactured from solid steel with a galavanised steel square base that can be bolted to the ground. The post is hinged at the bottom so that it lays flat to the ground to allow vehicle access it can be locked in the upright position using a padlock (not supplied). If required chain can be looped through the handle to fence off the parking zone.

Anti Fatigue & Safety Floor Matting

Washable in a domestic washing machine (applicable to sizes 0.6 x 0.85m & 0.85 x 1,2m). Traps up to 90% of tracked-in dirt. Also traps moisture, grit and grease. Holds up to 3.5ltr/m2 and 800g of dry dust. Bleach and fade resistant - 11 year warranty against significant colour loss. Non-skid Nitrile rubber backing. Thickness: 9mm. Colour: Black/steel, black/brown, black/red, black/blue.
Please allow 5 - 7 days for delivery.

Cobawash

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

Graphic Floor Signs and Identification Markers

A range of hi-visibility graphic floor signs. Each sign is 430mm in diameter and designed to highlight warnings or special requirements required by industry.

Each marker is printed onto the underside of a clear PVC film that has been selected to withstand the traffic in a modern warehouse and then laminated on the back surface with an aggressive permanent adhesive. They are suitable for use on dry, clean flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions. Although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is needed.

Squire Old English Padlock

4-lever padlock with forged steel shackles, cold rolled steel cases. Brass bolt levers and keyhole covers. Suitable for outdoor security applications.

Specifications:
Body width: 64mm.
Shackle dia x clearance: 10mm x 21mm.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.