Rubber Runners

Made from hard wearing fine fluted rubber. Ideal for walkways and acts as an insulator against a cold concrete floor. Also used on work bench surfaces for protection against damaged parts. Colour: Black only.
Please allow 5 - 7 working days for delivery.

Commercial Black Sheets

General-purpose grade for water service and dilute chemicals. Low cost waterproof seals, gaskets. 68 shore A hardness. Tensile strength at break: 3.0Mpa. Elongation at break: 200%.

Cobamat Roll - Light

Hole size: 30 x 30mm, thickness 12mm. Cross ribbed in both directions for added grip. Designed to reduce operator fatigue. Gives a safe operating surface as debris falls through the matting. Insulates the operator from the cold concrete floor. Optional extras: Bevelled safety edging (factory fitted).
Fire tested to DIN54332 (B2) part of DIN4102.
Please allow 5 - 7 working days for delivery.

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

COBAGRiP Light

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Manufactured from 1mm flexible GRP sheet.
Ideal for use on undulating surfaces.
Can be used in food production areas.
Product height: 1mm GRP base overall 2.4mm.

COBAGRiP Sheet

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Ideal solutions for slip hazards such as spilt liquids or ice.
Available in 3 colours to meet all DDA requirements. Suitable for use with forklift traffic. Simply bond or screw to the existing floor surface.
Product height: 3mm GRP base overall 5mm.

Fatigue Step Matting

Interlocking tiles made from hard-wearing rubber. Soft, yet resilient material offers fatigue relief benefits. Spilt liquids drain through the open holes for safety underfoot. Modules interlock to fit any size area.
Optional extras: corner units, bevelled edge units (black or yellow) and connectors.
Size: 0.9 x 0.9m. Thickness: 16mm.
Please allow 5 - 7 days for delivery.

Anti Fatigue & Safety Floor Matting

A decorative entrance mat at a budget price. Carpet surface is produced from 100% continuous filament olefin. Slip and stain resistant PVC backing. Helps to prevent dust, dirt and moisture from entering buildings.
Please allow 5 - 7 days for delivery.

Poly Plush Entrance Mat

Food Quality White Rubber Sheets

White, non-marking rubber manufactured FDA approved ingredients. Use in all food and beverage industries or sealing applications. Avoid vegetable/animal oils. 62 shore A hardness. Tensile strength at break: 4Mpa. Elongation at break: 300%

Solid Vinyl Matting

Excellent chemical resistance. Rolls manufactured from resilient PVC. Excellent sound insulation properties. Embossed pyramid surface for added grip. Economical and versatile rolls of loose lay matting. Thickness: 3mm. Colour: Black only.
Please allow 5 - 7 working days for delivery.