Cobamat Roll - Heavy

Hole size: 22 x 10mm, thickness 12mm. Close pitch hole allows the use of trucks and trolleys. Meets the DIN 4102 specification for flame retardancy. Conforms to slip resistance test EN13552 Category R10. Resists most industrial oils and chemicals. Ideal for high traffic flow areas, along main production lines and walkways. Gives a safe operating surface as debris falls through the matting. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working day delivery.

Commercial Black Sheets

General-purpose grade for water service and dilute chemicals. Low cost waterproof seals, gaskets. 68 shore A hardness. Tensile strength at break: 3.0Mpa. Elongation at break: 200%.

Para Shotblast Rubber Sheets

Tan coloured natural rubber. Outstanding resistance to wear and abrasion-used as protective screening in shotblasting applications but also used in strip or gasket form where durability is essential. 45 shore A hardness. Tensile strength at break: 15Mpa. Elongation at break: 400%

Orthomat Safety Anti-Fatigue Matting

Designed to reduce operator fatigue. Yellow borders create a highly visible safety warning helping to prevent accidents. Rolls are manufactured from 100% closed cell vinyl foam. Ideal for use when standing for long periods. Fire tested to DIN 54332 (B2) part of DIN 4102, conforms to slip resistance test EN 13552 Category R10.
Thickness: 9mm.
Colour: charcoal c/w yellow border.
Please allow 5 - 7 days for delivery.

Rubber Runners

Made from hard wearing fine fluted rubber. Ideal for walkways and acts as an insulator against a cold concrete floor. Also used on work bench surfaces for protection against damaged parts. Colour: Black only.
Please allow 5 - 7 working days for delivery.

Cobamat Roll - Heavy

Hole size: 22 x 10mm, thickness 12mm. Close pitch hole allows the use of trucks and trolleys. Meets the DIN 4102 specification for flame retardancy. Conforms to slip resistance test EN13552 Category R10. Resists most industrial oils and chemicals. Ideal for high traffic flow areas, along main production lines and walkways. Gives a safe operating surface as debris falls through the matting. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working day delivery.

Food Quality White Rubber Sheets

White, non-marking rubber manufactured FDA approved ingredients. Use in all food and beverage industries or sealing applications. Avoid vegetable/animal oils. 62 shore A hardness. Tensile strength at break: 4Mpa. Elongation at break: 300%

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

Diamond Tread Matting

Ideal safety matting for welding bays. Heavy duty ‘diamond tread’ top surface for extended wear. Comfortable foam backing offers superior fatigue relief. Flame retardant top surface – fire test classification of Cfl-s1. Ideal for welding bays and demanding industrial use. Supplied with ramped edges all round.
Colour: Black.
Product height: 12.5mm.