Orthomat Anti-Fatigue Matting

Designed to reduce operator fatigue. Rolls are manufactured from 100% closed cell vinyl foam. Insulates against cold concrete floors. Ideal for assembly lines and packaging areas. Pebble surface allows ease of cleaning.
Conforms to slip resistance test EN 13552 category R10, Fire tested to DIN 54332 (B2) part of DIN 4102.
Thickness: 9mm.
Please allow 5 -7 days for delivery.

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

Cobamat Roll - Light

Hole size: 30 x 30mm, thickness 12mm. Cross ribbed in both directions for added grip. Designed to reduce operator fatigue. Gives a safe operating surface as debris falls through the matting. Insulates the operator from the cold concrete floor. Optional extras: Bevelled safety edging (factory fitted).
Fire tested to DIN54332 (B2) part of DIN4102.
Please allow 5 - 7 working days for delivery.

Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

Commercial Black Sheets

General-purpose grade for water service and dilute chemicals. Low cost waterproof seals, gaskets. 68 shore A hardness. Tensile strength at break: 3.0Mpa. Elongation at break: 200%.

Para Shotblast Rubber Sheets

Tan coloured natural rubber. Outstanding resistance to wear and abrasion-used as protective screening in shotblasting applications but also used in strip or gasket form where durability is essential. 45 shore A hardness. Tensile strength at break: 15Mpa. Elongation at break: 400%

COBAGRiP Stair Tread

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Silicone Carbide surface helps to prevent slip accidents on stairs. Designed to fully cover the stair area.
55mm x 55mm contrasting coloured nosing to meet DDA requirements. Can be used in conjunction with COBAGRiP sheet.
Product Height: 3mm GRP base overall 5mm.

Solid Fatigue Step Matting

New improved system no longer requires separate connectors and all edge pieces now have one built-in corner that can be cut off if used along a run. Can withstand temperatures up to 160°C. Manufactured from extremely durable rubber. Designed to offer the highest comfort factor. Tiles interlock to form a mat size and shape of your choice. Ideal for use where operators are standing for prolonged periods.
Optional extras: bevelled edge units (black or yellow).
Size: 0.9 x 0.9m.
Thickness: 17mm.
Please allow 5 - 7 days for delivery.

Insertion Rubber Sheets

Similar properties to standard commercial but embedded textile reinforcement offers increased tensile strength and tear resistance. 68 shore A hardness. Tensile strength at break: 2.5Mpa. Elongation at break: 200%