Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

Cobamat Roll - Inter

Hole size: 30 x 10mm, thickness 12mm. Easy to clean with mild detergent and/or steam cleaned. Offers user comfort even in bare foot applications. Fire tested to DIN54332 (B2) part of DIN4102. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Gives a safe operating surface as debris falls through the matting. Easily cut to any shape. Gives added grip in wet/oily areas. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working days delivery.

Clean Step Matting

Protects against dirt and bacterial pollution. Adhesive surface attracts and contains both dust and dirt. Disposable, effective and economical. Simply peel off the used sheet to expose a fresh one. Each pad contains 60 sheets. Refillable.
Please allow 5 - 7 days for delivery.

Workstation Matting

Manufactured from flexible vinyl, thickness 12mm. Gives a safe operating surface as debris falls through the matting. Yellow borders create a highly visible safety warning helping to prevent accidents. Conforms to slip resistance test EN 13552 Category R10. Fire tested to DIN54332 (B2) part of DIN 410. Cross ribbed in both directions for added grip. Designed to reduce operator fatigue. Easily cleaned with hot soapy water. Colour: Black with yellow bevelled edges.
Please allow 5 - 7 working days for delivery.

Rubber Runners

Made from hard wearing fine fluted rubber. Ideal for walkways and acts as an insulator against a cold concrete floor. Also used on work bench surfaces for protection against damaged parts. Colour: Black only.
Please allow 5 - 7 working days for delivery.

Nitrile Rubber Sheets

Excellent, resistance to oils, fuels, petroleum, most solvents. Good abrasion resistance. 62 shore A hardness. Tensile strength at break: 5Mpa. Elongation at break: 200%

Shotblast Rubber Sheets

A cost-effective, abrasion-resistant rubber. 62 shore A hardness. Tensile strength at break: 10Mpa. Elongation at break: 350%

Neoprene Rubber Sheets

Good resistance to material oils, greases, dilute acids and alkalis. Good ageing and weathering properties make it suitable for outdoor applications. 65 shore A hardness. Tensile strength at break: 6Mpa. Elongation at break: 250%

Solid Fatigue Step Matting

New improved system no longer requires separate connectors and all edge pieces now have one built-in corner that can be cut off if used along a run. Can withstand temperatures up to 160°C. Manufactured from extremely durable rubber. Designed to offer the highest comfort factor. Tiles interlock to form a mat size and shape of your choice. Ideal for use where operators are standing for prolonged periods.
Optional extras: bevelled edge units (black or yellow).
Size: 0.9 x 0.9m.
Thickness: 17mm.
Please allow 5 - 7 days for delivery.