Nitrile Dipped Gloves

An elastic glove in nylon which is fully dipped in nitrile rubber for complete protection. The roughened grip provides the glove with excellent gripping ability as well as good protection against wear and tear and punctures. The glove is also very flexible and provides first-rate fingertip sensitivity. It is ideal for assembly work and workshops where you come into contact with liquids and oils. Machine washable at 40C.
Conforms to EN388 - 4.1.2.1. Cat 2.

TEGERA 733

Body Protectors - Proshield 10

Garment description and features: Nylon zipper front with zipper flap, attached hood, elastic at hood, wrists, back waist and ankles. Exceeds minimum size requirements for North America and Europe; Set sleeve design with underarm gussets (extra fabric) allows greater arm movement. Unique design zips over neck to above the chin, eliminating exposed neck areas. Serged seams.
CE Type 5 & 6 for noxious dust and splash. Fabric description: SMMS material. Ideal for dry particulate barrier and repellency. Lightweight, and breathable. Improved strength, splash and particulate resistance in comparison to many traditional SMS products. Anti-static treated.

Lightweight Safety Helmet

The EVOLite is extremely lightweight, around 20% lighter than a standard safety helmet, still performing above the EN397 standard thanks to its ABS lightweight shell. 6 point Terylene cradle harness system with leatherette sweatband, universal accessories slots, slip ratchet adjustment system (Size 53-64cm). Larger logo area front and back (logos available on 6 different positions).

EVOLite - Vented

Industrial Safety Boots - 6630

Manufactured to EN345. Soles resistant to oils, fats, acids, petrol, alkalis and heat to 80°C. 200 joules toe protection. Airwair cushioned sole.



Black. Safety basic.

TuffSafe Workwear

The TuffSafe back support belt has been designed specifically to be used in work situations where the lumbar spine requires support and protection without restricting mobility. The combination of the support belt with braces helps to ensure the belt stays in the correct place to provide the support you require whilst working.

The rear panel of the belt is elasticated, and given added strength by having sewn within it four flexible braces. The side panels consist of a non-stretch material to ensure a supportive tight fit can be achieved. To provide further support, the lumbar support has elasticated tension straps on each side which when pulled tight and attached to their Velcro attachment points provide further support to your lower back.

The TuffSafe back support belt is well made and designed to help protect the back against aggravating existing injuries and strains as well as helping to avoid new injury occurring

TuffSafe Back Support Belts

Waist Size: S 28-32''

Mixed Fibre

Poly/cotton mix. Knitted wrist. Heavy-duty multi-purpose handling gloves.

HyFlex® Foam 11-800 - General-Purpose Gloves

The original HyFlex foam gloves are lightweight, general purpose gloves that provide workers with exceptional comfort. The foam nitrile coating provides lightweight resistance to snags and abrasion whilst providing excellent grip on lightly oiled surfaces.

Features & Benefits:
Seamless knitted low-lint nylon liner.
Close, comfortable fit for dexterity, sensitivity and flexibility.
Breathable grey foam nitrile coating reducing perspiration build-up.
Good grip in dry and slightly oily environments.
Silicone-free materials reduce potential product contamination.

Heavy Duty Pique Polo Shirts

Heavyweight poly-cotton material for
Weight: 240gsm
50% Polyester/50% Cotton
3 Button placket with self-colour buttons and sewn-in spare
Two self colour rod design on collar and cuffs
Twin needle stitching throughout with taped neckline, half moon yoke and Cuffed Sleeves
Available in a full range of sizes from Small to XXXXX-Large.

Choice of colours:
Red, Navy, Royal, Bottle, Black, White, Burgundy, Sky, Ash, Sunflower, Charcoal, Stone, Ocean Blue.

Knitted Safety Gloves

Knitted safety glove with microporous nitrile foam coating. Extremely lightweight with outstanding dexterity right to the
fingertips. Excellent mechanical abrasion resistance. Microporous foam coating. Exceptional wearer comfort. Applications: fine assembly work, inspection/finishing.

Unilite 6605

EVO2® Vented, Standard Peak Safety Helmet

EVO2® features a traditional 6-point polyethylene harness and OneTouch™ slip ratchet. The EVO2® offers the most economical top level protection. Conforms to EN397.

Tough HDPE shell: in tests the EVO2™ proved far tougher than the EN397 standard required and far tougher than any of its competitors.

Harness: traditional 6-point polyethylene harness.

Chamlon™ sweatband: Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.

3D precision fitting: never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
Adjustment: OneTouch™ slip ratchet.
Ventilation: side and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3°C.
Universal slots: enables firm fitting of a range of Surefit™ safety visors and ear defenders.
Branding: extra large area for logos on the front, sides, and rear.

EVO2 Vented Safety Helmet - White

AJF030-000-100