Tool Lanyard Single Locking Carabiner

3108
Heavy duty (500kgf) self-locking carabiner. Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck. Stretch cord surrounded by tubular nylon webbing. Lock stitching at both ends for extra security. Short: 28" to 35" (710 - 890mm). Hi-Vis lime.
Maximum safe working capacity: 10lbs. (4.55kg).
Adjustable barrel lock for tool attachment.

Tool Lanyard Loops

3103
Three elastic lanyards that attach to the 3102 series lanyards.
Quick release buckle. Stretch cord surrounded by tubular nylon webbing. Lock stitching for extra security. Adjustable barrel lock. Hi-Vis lime.
Maximum safe working capacity: 2.27kg.

Wrist Lanyard

3115
Secures small hand tools so they don’t wreck someone else’s day. Poly webbing cuff secures to wrist. Tether length 190mm. Ribbed pull cord. Adjustable barrel lock. Tethers small tools. Black.
Size: small/medium.

Accessory Anchor

3175
Wraps around railings and beams to hold tool lanyards, canvas buckets and other accessories. Heavy duty 45mm Tetoron webbing strap, nickel-plated iron D-Ring. Black 840D nylon sleeve material. Heavy gauge, contrasting colour stitching. Not for climbing or fall arrest.
Maximum safe working capacity: 180kg.

Tool@rrest Tie Hooks - Large Locking Hook

Super duty, reusable locking tie hook for organizing and cinching hoses, cords, pipe, and almost anything else. Colour: Hi vis orange.

Specifications:
Large hook attachment with 360° swivel (1.5"/38mm).
Cable lock for security and increased load capacity.
Adjustable sliding belt lock mechanism.
High tensile strength, weather resistant Nylon 66.
Excellent resistance to oil, salt, solvents, and alkali.
Temp range: -40°-176°F (-40°-80°C).
Recommended load limit: 44lbs (20kg).

3 sizes available:
Short belt (30cm).
Medium belt (40cm).
Long belt (50cm).

Front & Rear D Elasticated Harness

With the introduction of elasticated webbing on the leg & lower chest straps, the RGH9 harness provides additional comfort and support during use. Based on the RGH2, this RGH9 is also fitted with a rear D and a chest mounted front D. This harness can be used similar to the RGH1 (see data sheet), but has the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane.

A variety of other devices can be used with the front dee ring, but please check for suitability.

In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied to the front dee ring.

Accredited to: EN 361.
Web Material: 45mm water repellent polyester.
Nylon/polyester elasticated leg straps.
Fittings: High tensile steel alloy & st/steel.
Weight: 1.25kg.
Features: Rear & front attachment point, rip stitch indicators.

15 mtr Wire Fall Arrest & Rescue Block

The RGA4 is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGA4 can raise the operative to safe area, if the area below is unsuitable.

The RGA4 can also be fitted to the RGR1 tripod for use in the confined access industry.

The Man-riding rescue retrieval winch function is for use only as a rescue provision & NOT for access / egress.
Where an operative is required to be lowered / raised for access / egress, then please use such equipment as the RGR7 50m Two-speed Man Riding RGR7 Winch.
This arrangement must be backed up with a independent separate fall arrest system, and a rescue provision that is also separate to the winch. Where a 15m maximum length is suitable the RGA4 / RGA4H can provide both fall arrest back-up as well as the rescue provision.
If the requirement is for more than 15m metres, please contact us for further details.

Accredited to: EN 360 & EN 1496 A&B
Cable spec: 15 x 5mm Galvanized Steel Wire Rope (Also available with stainless steel wire)
Connector: Double action. High tensile steel alloy
Weight: 11.35 kg
Features: Fall indicating connector. Retrieval system.
Size mm: L 340 x W 258 x D 80
Max Arrest Force: < 6 kN
Approx Arrest Dist: 0.5 Metres

Hard Hat Clamp Lanyard

3150
Easily and comfortably secures a hard hat to a worker to prevent the item from falling. Comfortably attaches to hard hats and other head wear. Easy release clamp attaches to just about anything. Comfortable high stretch elastic material. One size - adjustable. Hi-Vis lime.

Tool Lanyard - Single Locking Carabiner

3102 - Extended
Allows you to quickly detach a tethered tool and exchange it out with another. Comes complete with lanyard and one detachable tool attachment. Stretch cord surrounded by tubular nylon webbing. Lock stitching at both ends for extra security. Quick release buckle. Works with additional lanyard loop attachments also available and sold separately. Hi-Vis lime.
Max. safe working capacity: 2.27kg.
Length: 1100 - 1400mm.

Tool@rrest Tie Hooks - Large Locking Hook

Super duty, reusable locking tie hook for organizing and cinching hoses, cords, pipe, and almost anything else. Colour: Hi vis orange.

Specifications:
Large hook attachment with 360° swivel (1.5"/38mm).
Cable lock for security and increased load capacity.
Adjustable sliding belt lock mechanism.
High tensile strength, weather resistant Nylon 66.
Excellent resistance to oil, salt, solvents, and alkali.
Temp range: -40°-176°F (-40°-80°C).
Recommended load limit: 44lbs (20kg).

3 sizes available:
Short belt (30cm).
Medium belt (40cm).
Long belt (50cm).