15 mtr Wire Fall Arrest & Rescue Block

The RGA4 is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGA4 can raise the operative to safe area, if the area below is unsuitable.

The RGA4 can also be fitted to the RGR1 tripod for use in the confined access industry.

The Man-riding rescue retrieval winch function is for use only as a rescue provision & NOT for access / egress.
Where an operative is required to be lowered / raised for access / egress, then please use such equipment as the RGR7 50m Two-speed Man Riding RGR7 Winch.
This arrangement must be backed up with a independent separate fall arrest system, and a rescue provision that is also separate to the winch. Where a 15m maximum length is suitable the RGA4 / RGA4H can provide both fall arrest back-up as well as the rescue provision.
If the requirement is for more than 15m metres, please contact us for further details.

Accredited to: EN 360 & EN 1496 A&B
Cable spec: 15 x 5mm Galvanized Steel Wire Rope (Also available with stainless steel wire)
Connector: Double action. High tensile steel alloy
Weight: 11.35 kg
Features: Fall indicating connector. Retrieval system.
Size mm: L 340 x W 258 x D 80
Max Arrest Force: < 6 kN
Approx Arrest Dist: 0.5 Metres

Shock Absorbing Lanyard with Galvanised Connectors - 2M

Shock absorbing webbing lanyard equipped with 2 screwgate karabiners. Length 2m.

Tool Lanyard - Single Locking Carabiner

Have multiple tools you need to keep tethered? The Squids 3102 Detachable Tool Lanyard allows you to quickly detach a tethered tool and exchange it out with another. Built from durable tubular nylon webbing, these tool lanyards are easy to use, affordable and durable. Package comes complete with lanyard and one detachable tool attachment. Works with additional lanyard loop attachments also available and sold separately.



3102 - Standard
Allows you to quickly detach a tethered tool and exchange it out with another. Comes complete with lanyard and one detachable tool attachment. Stretch cord surrounded by tubular nylon webbing. Lock stitching at both ends for extra security. Quick release buckle. Works with additional lanyard loop attachments also available and sold separately. Hi-Vis lime.
Max. safe working capacity: 2.27kg.
Length: 890 - 1100mm.

Front & Rear D Elasticated Harness

With the introduction of elasticated webbing on the leg & lower chest straps, the RGH9 harness provides additional comfort and support during use. Based on the RGH2, this RGH9 is also fitted with a rear D and a chest mounted front D. This harness can be used similar to the RGH1 (see data sheet), but has the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane.

A variety of other devices can be used with the front dee ring, but please check for suitability.

In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied to the front dee ring.

Accredited to: EN 361.
Web Material: 45mm water repellent polyester.
Nylon/polyester elasticated leg straps.
Fittings: High tensile steel alloy & st/steel.
Weight: 1.25kg.
Features: Rear & front attachment point, rip stitch indicators.

Tool@rrest Tie Hooks - Large Locking Hook

Super duty, reusable locking tie hook for organizing and cinching hoses, cords, pipe, and almost anything else. Colour: Hi vis orange.

Specifications:
Large hook attachment with 360° swivel (1.5"/38mm).
Cable lock for security and increased load capacity.
Adjustable sliding belt lock mechanism.
High tensile strength, weather resistant Nylon 66.
Excellent resistance to oil, salt, solvents, and alkali.
Temp range: -40°-176°F (-40°-80°C).
Recommended load limit: 44lbs (20kg).

3 sizes available:
Short belt (30cm).
Medium belt (40cm).
Long belt (50cm).

Miller Manyard Shock Absorbing Lanyard - Scaffold Hook

Miller Manyard with double action scaffold hook and karabiner. Lightweight, stretchable fall arrest lanyard greatly reduces the risks of tripping and snagging for increased safety.

Positioning Lanyard & Retractable Webbing

1008286 Work positioning lanyard is passed around the supporting structure and connected to the side D-rings of the harness, the positioning lanyard allows the operator to work in a safe and supported hands-free position at height. Length 2m.

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH2 Front & Rear Body Fall Arrest Harness - 2 Point Attachment

Two point front & rear body harness manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable shoulder and thigh straps and fitted with high tensile stainless steel fittings and back anchorage dorsal D-ring attachment and chest mounted D-ring attachment.
Also fitted with rip stitch fall indicators.
Weight: 1.22kg

Certified to:
CE 0320
EN 361
EN 364

Australian Standard: AS/NZS 1891.1:2007

Hard Hat Clamp Lanyard

3150
Easily and comfortably secures a hard hat to a worker to prevent the item from falling. Comfortably attaches to hard hats and other head wear. Easy release clamp attaches to just about anything. Comfortable high stretch elastic material. One size - adjustable. Hi-Vis lime.

Fast Fit Harness

The RGH12 has been developed in conjunction with the Fire Service. The speed and simplicity of assembly and adjustment makes this harness the ideal solution where rapid and simplistic donning is crucial.

The waist and leg straps comprise of 'Quick Click' snap to buckles, which cannot be incorrectly assembled, and pulling down on the webbing tails easily tightens the front shoulder and chest straps. The additional waist strap and extra wide sit strap, provide added support and comfort during use and also whilst in suspension. Pressure is also eased from the legs with the presence of leg comfort pads.

The harness comprises front and rear D-rings for the purpose of fall arrest, and provides the perfect solution where speed and extra comfort is preferred.

Accredited to: EN361.
Web Material: 45mm water repellent polyester.
Fittings: High tensile steel alloy.
Weight: 1.7kgs.
Features: Front & rear attachment points sit support, strap, leg support pads, waist etrap and Quick Click fittings on leg and waist straps.