Tool Lanyard Loops

3103
Three elastic lanyards that attach to the 3102 series lanyards.
Quick release buckle. Stretch cord surrounded by tubular nylon webbing. Lock stitching for extra security. Adjustable barrel lock. Hi-Vis lime.
Maximum safe working capacity: 2.27kg.

15 mtr Wire Fall Arrest & Rescue Block

The RGA4 is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGA4 can raise the operative to safe area, if the area below is unsuitable.

The RGA4 can also be fitted to the RGR1 tripod for use in the confined access industry.

The Man-riding rescue retrieval winch function is for use only as a rescue provision & NOT for access / egress.
Where an operative is required to be lowered / raised for access / egress, then please use such equipment as the RGR7 50m Two-speed Man Riding RGR7 Winch.
This arrangement must be backed up with a independent separate fall arrest system, and a rescue provision that is also separate to the winch. Where a 15m maximum length is suitable the RGA4 / RGA4H can provide both fall arrest back-up as well as the rescue provision.
If the requirement is for more than 15m metres, please contact us for further details.

Accredited to: EN 360 & EN 1496 A&B
Cable spec: 15 x 5mm Galvanized Steel Wire Rope (Also available with stainless steel wire)
Connector: Double action. High tensile steel alloy
Weight: 11.35 kg
Features: Fall indicating connector. Retrieval system.
Size mm: L 340 x W 258 x D 80
Max Arrest Force: < 6 kN
Approx Arrest Dist: 0.5 Metres

Self Retracting Lifeline

Miller Falcon SRL; Self retracting lifeline with high impact-resistant nylon housing to withstand the harsh rigours of the toughest applications (Lifetime housing guarantee) and no annual factory re-certification is required - An authorised competent person can annually re-inspect the FalconTM SRL.

Duraflex Body Harness - 2 Point

DuraFlexTM Stretchable Body Harnesses
The Miller DuraFlex™ harness is unique. The harness stretches naturally with every movement of the wearer giving a better fit, improved comfort and better compliance. Particularly suitable for the construction and general industrial use where PPE should be worn. All DuraFlex™ harnesses are CE certified and comply with EN 361 and, where necessary, with EN 358.

MA04

Duraflex 2-point harness with front webbing loops and rear D-ring attachments; Patented Miller Duraflex webbing is designed to stretch and conform to the workers movements for greater mobility and comfort. An invisible high-tech Teflon coating repels water, oil, grease, dirt and concrete dust which extends the service life of the Duraflex harness compared to conventional harnesses.

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH1 Rear Body Fall Arrest Harness - 1 Point Attachment

One point rear body harness manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable and fitted with high tensile steel fittings and back anchorage dorsal D-ring attachment.
Also fitted with rip stitch fall indicators.
Weight: 1kg

Certified to: CE 0320
EN 361

Duraflex Body Harness - 1 Point

DuraFlexTM Stretchable Body Harnesses
The Miller DuraFlex™ harness is unique. The harness stretches naturally with every movement of the wearer giving a better fit, improved comfort and better compliance. Particularly suitable for the construction and general industrial use where PPE should be worn. All DuraFlex™ harnesses are CE certified and comply with EN 361 and, where necessary, with EN 358.

MA02

Duraflex 1-point harness with rear D-ring attachment; Patented Miller Duraflex webbing is designed to stretch and conform to the workers movements for greater mobility and comfort. An invisible high-tech Teflon coating repels water, oil, grease, dirt and concrete dust which extends the service life of the Duraflex harness compared to conventional harnesses.

Rescue Tripod

The RGR1 Rescue Tripod is portable, lightweight and is easy to erect on site. It has adjustable lower and middle legs at 80mm intervals to adapt and adjust to the most demanding surfaces and varying ground conditions. There are two additional anchorage points (SWL 200kgs each)on the underside of the head for additional primary/secondary systems. This unit has many applications such as confined access, entry, rescue, retrieval, manhole, silos & trenches, etc. The RGR1 is extremely versitile and is recommended for use with the side attachment of the RGR7 rescue winch and the RGR4 fall arrest & rescue recovery winch.

Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH4 Front & Rear Body Fall Arrest Harness With Belt - 4 Point Attachment

Four point front & rear body harness with belt manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable and fitted with high tensile stainless steel fittings, back anchorage dorsal D-ring attachment, chest mounted D-ring attachment and two side D-ring attachments. The work-positioning belt is comfortable and provides lumbar support, it is fitted with three loops for carrying tools leaving your hands free.
Also fitted with rip stitch fall indicators.
Weight: 1.90kg

Certified to:
CE 0320
EN 361
EN 364
EN 358

Australian Standard: AS/NZS 1891.1:2007

Tool@rrest Tie Hooks - Large Locking Hook

Super duty, reusable locking tie hook for organizing and cinching hoses, cords, pipe, and almost anything else. Colour: Hi vis orange.

Specifications:
Large hook attachment with 360° swivel (1.5"/38mm).
Cable lock for security and increased load capacity.
Adjustable sliding belt lock mechanism.
High tensile strength, weather resistant Nylon 66.
Excellent resistance to oil, salt, solvents, and alkali.
Temp range: -40°-176°F (-40°-80°C).
Recommended load limit: 44lbs (20kg).

3 sizes available:
Short belt (30cm).
Medium belt (40cm).
Long belt (50cm).

Tuffsafe Fall Arrest Equipment

The lanyard block is a retractable mini web block ideal for personal issue to operatives working at height. The unit is designed to be connected and worn directly on a fall arrest harness. Locks on with decelerating brake action in the event of a fall and recoils the lanyard when slack is introduced to reduce trip hazards in tight work spaces. Compact design, built in shock pack. Has a working length of 2.5 metres.
Max fall arrest force 6KN.
Size: (L)100 x (W)110 x (D)75mm
Weight: 1.12kg

Certified to: CE 0320
EN 364
EN 360

TSEAL1 2.5m Retractable Energy Absorbing Lanyard Block - with Karabiner Hook