SiteSafe® Fall Arrest Harnesses

SiteSafe® fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

SiteSafe® full-body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The full-body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue. Fully adjustable designs so one size fits all.

The range includes: 1 & 2 point fall arrest harnesses.

SBHP020 Full Body Fall Arrest Harness - 2 Point Attachment

Two point full body harness manufactured from strong 45mm wide polyester webbing.
Lightweight, durable comfortable and easy to put on ideal for all day comfort and use.
Adjustable thigh and chest straps with metal buckles and back anchorage dorsal D-ring attachment.
Capable of supporting up to 310lb
(22st/140.6kg).

Certified to: CE 0321
EN 358:1999 EN361:2002

Tuffsafe Fall Arrest Equipment

Trauma suspension straps are simple and easy to use and can fit all Tuffsafe harnesses. They allow the worker to stand up in their harness to ease the discomfort whilst suspended from a lanyard after a fall. Helps release the tension within the harness straps to relieve pressure on the groin which helps prevent loss of circulation to the legs and feet.
Prior to use attach one pack to the outer side of each leg strap. In the event of a fall unzip the pouches to release the straps and thread the plain end through both chrome rings and back through only one and pull tight to form a loop approx shin height. Stand up slowly on the straps and the discomfort will be relieved.
Lightweight and unobstructive.
Weight: 150g

TSTSS Trauma Suspension Straps

Tool@rrest Tie Hooks - Large Locking Hook

Super duty, reusable locking tie hook for organizing and cinching hoses, cords, pipe, and almost anything else. Colour: Hi vis orange.

Specifications:
Large hook attachment with 360° swivel (1.5"/38mm).
Cable lock for security and increased load capacity.
Adjustable sliding belt lock mechanism.
High tensile strength, weather resistant Nylon 66.
Excellent resistance to oil, salt, solvents, and alkali.
Temp range: -40°-176°F (-40°-80°C).
Recommended load limit: 44lbs (20kg).

3 sizes available:
Short belt (30cm).
Medium belt (40cm).
Long belt (50cm).

SiteSafe® Fall Arrest Harnesses

SiteSafe® fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

SiteSafe® full-body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The full-body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue. Fully adjustable designs so one size fits all.

The range includes: 1 & 2 point fall arrest harnesses.

BHP025 Full Body Fall Arrest Harness with Work Positioning Belt -2 Point Attachment

Two point full body harness manufactured from strong 45mm wide polyester webbing.
Lightweight, durable comfortable and easy to put on ideal for all day comfort and use.
Adjustable thigh and chest straps with metal buckles and back anchorage dorsal D-ring attachment.
Two point anchor straps for extra harnessing support.
Detachable work positioning belt with textile back support with adjustable strap with metal buckles and two D-rings.
Two polyester/plastic 90mm D-rings and clip attachment at the rear.
Capable of supporting up to 310lb
(22st/140.6kg).

Certified to: CE 0321
EN 358:1999 EN361:2002

Miller Manyard Shock Absorbing Lanyard - Snap Hook

Miller Manyard with snaphook and karabiner. Lightweight, stretchable fall arrest lanyard greatly reduces the risks of tripping and snagging for increased safety.

Miller Manyard Shock Absorbing Lanyard - Snap Hook

Miller Manyard with snaphook and karabiner. Lightweight, stretchable fall arrest lanyard greatly reduces the risks of tripping and snagging for increased safety.

Self Retracting Lifeline

Miller Falcon SRL; Self retracting lifeline with high impact-resistant nylon housing to withstand the harsh rigours of the toughest applications (Lifetime housing guarantee) and no annual factory re-certification is required - An authorised competent person can annually re-inspect the FalconTM SRL.

15 mtr Wire Fall Arrest & Rescue Block

The RGA4 is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. As most rescue systems lower the casualty, the RGA4 can raise the operative to safe area, if the area below is unsuitable.

The RGA4 can also be fitted to the RGR1 tripod for use in the confined access industry.

The Man-riding rescue retrieval winch function is for use only as a rescue provision & NOT for access / egress.
Where an operative is required to be lowered / raised for access / egress, then please use such equipment as the RGR7 50m Two-speed Man Riding RGR7 Winch.
This arrangement must be backed up with a independent separate fall arrest system, and a rescue provision that is also separate to the winch. Where a 15m maximum length is suitable the RGA4 / RGA4H can provide both fall arrest back-up as well as the rescue provision.
If the requirement is for more than 15m metres, please contact us for further details.

Accredited to: EN 360 & EN 1496 A&B
Cable spec: 15 x 5mm Galvanized Steel Wire Rope (Also available with stainless steel wire)
Connector: Double action. High tensile steel alloy
Weight: 11.35 kg
Features: Fall indicating connector. Retrieval system.
Size mm: L 340 x W 258 x D 80
Max Arrest Force: < 6 kN
Approx Arrest Dist: 0.5 Metres

Front & Rear D Rescue Harness

The RGH5 is designed for use as a confined access harness. The front and rear attachment points can be used as standard fall arrest points and the rescue strap can be used for lifting and lowering. When used, the rescue strap keeps the operative in a near vertical position, which is preferred when recovering an unconscious casualty.

This harness is used throughout the industry in conjunction with a tripod (RGR1) and a winch unit to access confined spaces, vertical shafts, sewers and silos. As with all of the RidgeGear harnesses, the RGH5 is suitable for use with fall arrest/recovery blocks.

The harness is fully adjustable and is fitted with rip stitch indicators.
Accredited to: EN 361 & EN 1497.
Web Material: 45mm water repellent polyester.
Fittings: High tensile steel alloy.
Weight: 1.45kg.
Features: Rear & front attachment point, Rescue strap, rip stitch indicators.

SiteSafe® Fall Arrest Harnesses

SiteSafe® fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

SiteSafe® full-body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The full-body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue. Fully adjustable designs so one size fits all.

The range includes: 1 & 2 point fall arrest harnesses.

BHP010 Full Body Fall Arrest Harness - 1 Point Attachment

One point full body harness manufactured from strong 45mm wide polyester webbing.
Lightweight, durable comfortable and easy to put on ideal for all day comfort and use.
Adjustable thigh and chest straps with metal buckles and back anchorage dorsal D-ring attachment.
Capable of supporting up to 310lb
(22st/140.6kg).

Certified to: CE 0321
EN 358:1999 EN361:2002