Accessories and Spares for 3M Jupiter™ Air Powered Respiratory Protection

Spares to suit 3M Jupiter™ Air Powered Respirator Kit (MMP-959-2600B)

Accessories and Spares for 3M Jupiter™ Air Powered Respiratory Protection

Spares to suit 3M Jupiter™ Air Powered Respirator Kit (MMP-959-2600B)

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

Airfed Respirator

To Suit 3M® Versaflo® Air Respirators

Versaflo® TR-3600 Pre-Filter.

Protective Coverall 4565

The 3M® 4565 Protective Coveralls use a unique blend of fabrics, designed to not only reduce the weight of the coverall, enhance the softness and drape over the body, but significantly improve the chemical permeation performance. They are made with taped seams for increased protection against fine particles and liquid chemical sprays. They have been tested to EN 14126 for biological protection against infective agents (see datasheet for class details). The 3M® 4565 Protective Coveralls also come with a new 3-piece hood for improved manoeuvrability with 3M full-face piece respirators and goggles and benefit from additional comfort and convenience features including knitted cuffs and a two-way zip with a resealable storm-flap.

Type 4565

Made with taped seams for increased protection against fine particles and liquid chemical sprays . Tested to EN 14126 for biological protection against infective agents. Features including knitted cuffs and a two-way zip with a resealable storm-flap.
Available in white with red seams (CE Type 4/5/6).

Fit Test Kits

The revision of COSHH Regulations COSHH:2002, requires employers to conduct a fit-test on any employee wearing a tight fitting face pieces. Tight fitting face pieces include disposables, half masks and full face masks. The largest contributor to reduced respiratory protection is poor fit. Fit testing is an important requirement in the process of determining whether a given respirator is the correct respirator for a particular worker. Fit-testing helps determine that a particular model and size of respirator fits a worker so there is minimal face seal leakage. There are 2 fit testing methods: qualitative and quantitative. Generally, qualitative fit testing is acceptable for most disposables and half masks, although quantitative fit testing is required when negative pressure full face piece masks are used.



Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters.

3M Versaflo™ S-Series Head Covers

Integrated suspension models offer the advantages of being fully assembled and ready to use. They can be suitable for applications that require frequent replacement of the entire headtop assembly, such as pharmaceutical manufacturing or in situations where there’s less soiling of the outer fabric. For disposal, the suspension assembly and air inlet components can be quickley removed and separated for segregated waste streams where facilities are available.

S-333LG

Head and face coverage, as well as providing eye and face protection to EN 166 - liquid splash and low energy impact, with a durable, soft, quiet, low-linting fabric.

Protective Coverall 4565

The 3M® 4565 Protective Coveralls use a unique blend of fabrics, designed to not only reduce the weight of the coverall, enhance the softness and drape over the body, but significantly improve the chemical permeation performance. They are made with taped seams for increased protection against fine particles and liquid chemical sprays. They have been tested to EN 14126 for biological protection against infective agents (see datasheet for class details). The 3M® 4565 Protective Coveralls also come with a new 3-piece hood for improved manoeuvrability with 3M full-face piece respirators and goggles and benefit from additional comfort and convenience features including knitted cuffs and a two-way zip with a resealable storm-flap.

Type 4565

Made with taped seams for increased protection against fine particles and liquid chemical sprays . Tested to EN 14126 for biological protection against infective agents. Features including knitted cuffs and a two-way zip with a resealable storm-flap.
Available in white with red seams (CE Type 4/5/6).

3M 6000 Series Respiratory Protection

The 3M 6000 Series low maintenance full face mask features an impact resistant polycarbonate lens with a wide field of vision, a soft hypo-allergenic face piece with centrally mounted exhalation valve helps keep the mask cool and comfortable to wear. Whilst the four point adjustable harness ensures a comfortable and secure fit. The low profile side mounting design of the filters ensures an uninterrupted field of vision and are easy and quick to change, due to the unique bayonet filter fitting system. No costly maintenance or spare parts to purchase. Simply clean the mask as you would your normal respirator and it will provide good protection against a wide range of respiratory hazards when fitted with suitable filters, as well as eye and facial impact protection. Designed for low maintenance, maximum simplicity and comfort!

Conforms to: EN 136 Class 1.

Available in two sizes medium or large please refer to our catalogue.
Filters supplied separately.

6800S Full Face Respiratory Mask