Tuffsafe Fall Arrest Harnesses

Tuffsafe fall arrest harnesses are certified to the highest safety standards (EN361) and are designed to fit the wearer comfortably without restricting their movement over extended periods of use.

Tuffsafe body harnesses distribute fall forces throughout the body, substantially reducing the chance of injury.

The body harness keeps the worker suspended upright in the event of a fall and supported while awaiting rescue.

The range includes: 1, 2, 3 & 4 point fall arrest harnesses.

TSH2 Front & Rear Body Fall Arrest Harness - 2 Point Attachment

Two point front & rear body harness manufactured from strong 45mm wide water repellent polyester webbing.
Lightweight and durable therefore ideal for all day comfort and dependability.
Fully adjustable shoulder and thigh straps and fitted with high tensile stainless steel fittings and back anchorage dorsal D-ring attachment and chest mounted D-ring attachment.
Also fitted with rip stitch fall indicators.
Weight: 1.22kg

Certified to:
CE 0320
EN 361
EN 364

Australian Standard: AS/NZS 1891.1:2007

PSF Terrain EN345 Safety Footwear

Dual density polyurethane sole, heat resistant to 200°C, antistatic, water resistant upper, non-metal toecap and midsole (NMP: Non-Metal Protection. A breakthrough in completely metal-free footwear. Lightweight styles have a non-metal toecap and non-metal composite midsole, offering complete protection for employees working in areas where security screening is a necessity).

Unisex Safety Shoe (785NMP)

Black. Available in sizes 3-13.

Leather Safety Trainers

Air Bubble rubber sole heat resistant to 300°C, steel toecap and midsole. SBP Rating.

4041 Leather Safety Trainer

SiteSafe® Safety Spectacles

One piece wraparound polycarbonate spectacle which is light in weight and features hard coated anti-mist, scratch resistant lenses.

MIR Wraparound safety Glasses

Himalayan Safety Footwear

Wheat Nubuck SBP Himalayan ‘Iconic’ Safety Cross Trainer with steel midsole, 300 degrees heat resistant sole.

Rated to: SBP
Conform to: ENISO 20345-1

Sizes available: 6-12

Wheat Nubuck Safety Cross Trainer 5150

Uvex® Natural Cork Thermal Insulating Insole

Uvex hydroflex gel positioned directly under the heel providing optimal cushioning and comfort. The hydroflex gel absorbs shock by up to 75-80% which is produced when the heel strikes the ground during walking. Helps reduce fatigue when walking or standing for any length of time. Breathable natural cork footbed with excellent sweat absorption properties. Active coal in the insole helps neutralise foot odour. Antistatic.

Protective Coverall 4565

The 3M® 4565 Protective Coveralls use a unique blend of fabrics, designed to not only reduce the weight of the coverall, enhance the softness and drape over the body, but significantly improve the chemical permeation performance. They are made with taped seams for increased protection against fine particles and liquid chemical sprays. They have been tested to EN 14126 for biological protection against infective agents (see datasheet for class details). The 3M® 4565 Protective Coveralls also come with a new 3-piece hood for improved manoeuvrability with 3M full-face piece respirators and goggles and benefit from additional comfort and convenience features including knitted cuffs and a two-way zip with a resealable storm-flap.

Type 4565

Made with taped seams for increased protection against fine particles and liquid chemical sprays . Tested to EN 14126 for biological protection against infective agents. Features including knitted cuffs and a two-way zip with a resealable storm-flap.
Available in white with red seams (CE Type 4/5/6).

3M™ Cup-Shaped Dust/Mist Respirator

Protects against moderate levels of dusts and water and oil based mists found in many industries.
Standard: EN149:2001 FFP2 NR D, CE Marked. Assigned Protection Factor: 10 x WEL (Nominal Protection Factor 12 x WEL).

8320

TuffSafe Safety Footwear

Tuffsafe CAB09 Kevlar Composite Safety Ankle Boot is manufactured to EN ISO 20345. Using the latest materials such as Kevlar and Composite technologies we have produced a non-metallic safety ankle boot that is ideally suited for working in areas where security screening is a necessity.

Lightweight dual-density sole with increased comfort and shock absorption also resistant to heat up to 300C.
Non-metallic toecap and midsole.
Resists the build up and conductance of static electricity.

CAB09 Kevlar Composite Safety Ankle Boot

Classification: S1P.
Manufactured to EN345.
Temperature resistant sole to 300C.
200J non magnetic Kevlar toecap and midsole.
PU & Leather upper with antistatic dual density polyurethane/rubber sole with energy absorbing heels for extra comfort.

Colour: Black with green trim.
Available in sizes: 6-12.

Multi-Task 3 Gloves

Flexible Close fitting design ensures maximum user dexterity. Comfortable combination of materials offer excellent in-use comfort. Stretch materials flex in conjunction with the hand's natural movement. Protection reinforced area on palm and finger tips ensure added protection in key areas. Fingerless Multi-Task 3 has three open fingers.

EN388:2121