Chemical Resistant Special Hazard Clothing

Chemsol jacket and trousers are manufactured from high tear and abrasion resistant Elastomised PVC on a polyester base to give stretch comfort and chemical resistant properties to provide a high degree of safety for those handling dangerous chemicals. The jacket has a zip front fastening with velcro closure storm facing and hood with draw strings. The trousers have an elasticated waist and a long back length for additional protection. All seams are stitched and high frequency welded.

Both garments are CE marked as category III - PPE and conform to BS EN 467, providing chemical protection to parts of the body.

CSTE Chemical Resistant Trousers

Colour: Green

For the full range of workwear please refer to our catalogue.

Tuffsafe High Visibility Waistcoats

Tuffsafe high visibility satin yellow waistcoats are manufactured to BSEN471 to ensure hi-visibility clothing of the highest standard for high-risk environments.

High Visibility Waistcoat, Satin Yellow with Reflective Braces 2 Body Bands

These high visibility waistcoats from Tuffsafe are manufactured from high quality lightweight satin yellow polyester mesh, with 50mm retro-reflective bands and have Velcro fastening at the front.

Conform to:
BSEN471 Class 3 area of fluorescent background and retro reflective tape.
BSEN471 Class 2 retro reflective tape performance.
These garments comply with the requirements of directive 89/686/EEC and the above reference standards.

JSP Safety Helmets

The JSP range of head protection meets the requirements of industry where there is a risk of being injured by falling objects or when working in areas of restricted headspace. A safety helmet needs to protect the wearer from falling objects, collapsing structures and protruding extensions. Choosing the correct head protection is one of the most important decisions you will make when working in Construction and Industry where there is the risk of objects falling on the head, so why compromise JSP offers a large range of hard hats and safety helmets.

The Mark 3 Comfort Plus safety helmet from JSP is Europe's most popular design, these stylish helmets are tough, functional and offer an extremely comfortable secure fit on the head for prolonged periods of use. To make the Mark 3 as comfortable to wear as possible it has a replaceable foam sweatband and a 6-point Terylene webbing comfort plus a suspension harness, that supports the impact-resistant low dome profile UV stabilised high-density polyethylene shell, which incorporates a rain channel.

Fits head sizes: 530-620mm sizing (6,1/2"-7,3/4")
Helmet offers 440V electrical insulation
Accepts Cliptite accessories

Conforms to: EN397, ANSI Z89

Mark 3 Comfort Plus Safety Helmet

The Mark 3 Comfort Plus safety helmet with wheel ratchet size adjustment system.

SiteSafe® Safety Spectacles

Adjustable length for a superior fit. Wide angle lens and impact protection at extreme temperatures. Clear lens providing a sharper view. Ultra lightweight design. Scratch resistant. Anti-mist treatment. Class 1 optical quality. Neck lanyard included.
EU- Low energy impact protetion.
AUS/NZ - Medium energy impact protection. UV radiation protection below 380nm for outdorr use.

CE 89/686/EEC
EN 166
AS/NZS 1337
BMP 557823

SiteSafe® Luna Black Safety Spectacles with Clear lens and Lanyard

Tyvek Pro.Tech Coveralls

Tychem 'F' provides an even greater barrier against aggressive chemicals, toxic substances, gases and most organic chemicals. Manufactured to meet the seam-tightness requirements and whole-suit tests defined by the new European standards for Chemical Protective Clothing of Types 3 and 4.
Tyvek 'F' is a high performance barrier material.
It is produced by laminating TYVEK to a barrier film which is coated by a polymer. The combination of the film and the polymer provide a particle-tight material with good resistance to penetration and permeation by many liquids and gases.
Provides even higher protection. Flexible and lightweight yet strong. Stitched and taped seams. 100% protection against hazardous dust and powders. Outstanding protection against organic and inorganic acids and bases, many commonly used gases, most organic solvents, blood and blood-borne pathogens and certain chemical in aerosol and spray form. Anti-statically treated (inside surface).

Type 'F' Hooded

Back Support

Mesh panel for ventilation. Plastic support stays with non slip strips. Adjustable elastic side straps with hook and loop closure. Universal fit adjustable elastic suspenders straps sold separately.

Back Coach

Flame Retardant Boiler Suit

These Portwest coveralls are manufactured from Bizweld which is a heavyweight 100% cotton fabric that has been specially treated with a flame retardant finish. Typical uses: welding, cutting, grinding, electrical on-shore and off-shore oil and gas industries, automotive, public utilities etc.

Side pockets with access.
Stud front.
Rule pocket.
Resilient for over 50 washes
Certified En470-1, EN531: A1, B1, C1 and EN533.

BIZ1

Abrasion & Cut Resistant Nitrile

• Nitrile impregnation provides excellent abrasion resistance
• Superior grip in dry applications and good in many light oil applications
• Stretch material gives close, comfortable fit

EN388:3111

Mako Safety Trainer

71347
Black. Nubuck upper with Anti-abrasion leather inserts and dryfit lining. Alu-Lite toecap. Comfort-plus midsole. PU/TPU sole.

Seamless Knitted Gloves

• Available in 5 colours for complete colour co-ordination (white, blue, red, yellow and green).
• High cut resistant yarn with Dyneema® technology.
Cut Resistant: Innovative fibre attains maximum EN388 cut resistance - level 5.
• Low linting to prevent food contamination.
• Food contact approved.
• Ambidextrous for prolonged glove use.
• Can be laundered up to 95C.

BladeShades 5x5 Cut Level 5 Gloves

Available in sizes 7, 8, 9, 10 and 11, in white, blue, red, yellow and green.