Extra Grip Gloves - Grip It

Grip It, seamless knitted nylon glove with lightweight grip coating.
Applications: include Light Engineering Work, Component Handling, General Assembly, Electronics.
Strength: despite the lightweight construction, the gloves offer good resistance to abrasion and tear.
Handling: exceptional grip in dry applications and good in many light oil applications.
Comfort: the soft seamless knitted yarn provides an exceptional level of comfort, whilst the open back style allows excellent breathability.
Dexterity and Fit: the snug fit provides maximum dexterity for the most tactile of applications.
Flexibility and Strength: is maintained due to the quality of the grip coating.

Available as:
Grip It Original seamless knitted nylon glove with a full lightweight nitrile grip coating (Grey/White)
Grip It Blue/Grey seamless knitted nylon glove with lightweight nitrile grip coating (Blue/Grey)

Manufactured to EN388: 4121

Seamless Knitted Gloves

• Available in 5 colours for complete colour co-ordination (white, blue, red, yellow and green).
• High cut resistant yarn with Dyneema® technology.
Cut Resistant: Innovative fibre attains maximum EN388 cut resistance - level 5.
• Low linting to prevent food contamination.
• Food contact approved.
• Ambidextrous for prolonged glove use.
• Can be laundered up to 95C.

BladeShades 5x5 Cut Level 5 Gloves

Available in sizes 7, 8, 9, 10 and 11, in white, blue, red, yellow and green.

Polyco Long John Arm Length PVC Coated Gauntlets

•Excellent resistance to acids and alkalis.
Extra long length ideal for working in deep water, and will keep the wearer clean in muddy and dirty environments.
• Offers good mechanical properties and resistance to oils.
• Cotton liner provides high levels of comfort.
• Adjustable velcro strap for secure fit.
• Actifresh® treated - stays fresher.

Long John Arm Length PVC Coated Gauntlets

Extra long - ideal for working in deep water, and will keep the wearer clean in muddy and dirty environments. Offers good mechanical properties and resistance to oils. Integral PVC sleeve. Length: 64cms.

Cut Resistant Extra Grip Gloves

Grip prevents formation of oil film and displaces oil allowing maximum contact with tools and other surfaces in saturated situations. High visibility colour for easier signalling and compliance. Padded protection on back of hand and fingers reduces impact injuries. Made with SuperFabric® brand material for the highest cut resistance available on the market; EN388 Cut Level 5 (in noted enhanced areas).

HexArmor Gator Grip 4020

Abrasion, Cut & Heat Resistant Gloves - Standard

• Kevlar® provides increased protection against cuts, slashes and abrasion, whilst maintaining a high degree of dexterity for the wearer.
• Soft Kevlar® fibres offer the wearer reduced hand fatigue, allowing hands to breathe. The seamless construction will not irritate hands, even during long periods of wear.
• 100% Kevlar® aramid fibre offers increased resistance to heat.
• Can be worn on either hand.
• May be washed by machine or dry cleaned.

EN388:124X
EN407:X1XXXX

Touchstone Medium Weight Kevlar Heat Resistant Glove

Nitrile Gloves - Grip it Foam

• The soft seamless knitted yarn provides an exceptional level of comfort, whilst the open back style allows excellent breath ability.
• The snug fit provides maximum dexterity for the most tactile of applications.
• As well as providing excellent dry grip, the foamed nitrile coating channels oils and liquids away from the glove surface, ensuring superb wet grip.
EN388: 4121.

Nitrile Gloves - Grip it Foam

• The soft seamless knitted yarn provides an exceptional level of comfort, whilst the open back style allows excellent breath ability.
• The snug fit provides maximum dexterity for the most tactile of applications.
• As well as providing excellent dry grip, the foamed nitrile coating channels oils and liquids away from the glove surface, ensuring superb wet grip.
EN388: 4121.

Seamless Knitted Gloves

• Available in 5 colours for complete colour co-ordination (white, blue, red, yellow and green).
• High cut resistant yarn with Dyneema® technology.
Cut Resistant: Innovative fibre attains maximum EN388 cut resistance - level 5.
• Low linting to prevent food contamination.
• Food contact approved.
• Ambidextrous for prolonged glove use.
• Can be laundered up to 95C.

BladeShades 5x5 Cut Level 5 Gloves

Available in sizes 7, 8, 9, 10 and 11, in white, blue, red, yellow and green.

Extra Grip Gloves - Grip It

• Despite their lightweight construction, the Grip It range of gloves offer excellent resistance to abrasion. The high quality nitrile grip coating ensures maximum abrasion score as defined by EN388.
• The soft seamless knitted yarn provides an exceptional level of comfort and flexibility, whilst the open back style of the palm coated products allows excellent breath ability.
• The snug fit provides maximum dexterity for the most tactile of applications.
• Provides excellent dry grip.
EN388:4121

Seamless Knitted Gloves

• Available in 5 colours for complete colour co-ordination (white, blue, red, yellow and green).
• High cut resistant yarn with Dyneema® technology.
Cut Resistant: Innovative fibre attains maximum EN388 cut resistance - level 5.
• Low linting to prevent food contamination.
• Food contact approved.
• Ambidextrous for prolonged glove use.
• Can be laundered up to 95C.

BladeShades 5x5 Cut Level 5 Gloves

Available in sizes 7, 8, 9, 10 and 11, in white, blue, red, yellow and green.