Tuffsafe® Safety Boots

The Tuffsafe® BAB 04 safety boot is hard wearing and has deep padded collars to protect your ankles from knocks and bumps and padded tongues to evenly distribute the pressure of the laces across the bridge of your foot coupled with dual density soles the BAB 04 from Tuffsafe maximises comfort all day long. The 'U' hooks allow for rapid lacing/unlacing and easy fit adjustment of the boot. Leather upper with a dual density antistatic sole.

BAB 04 Dual Density Safety Boot

Classification: S1P
Manufactured to EN345.
200J steel toecap.
Steel midsole.
Antistatic dual density polyurethane sole, temperature resistant up to 200°C and resistant to oil, petrol, water, acid and alkalis.

Colour: Black.
Available in sizes: 6 to 12.

Tuffsafe Fall Arrest Equipment

Trauma suspension straps are simple and easy to use and can fit all Tuffsafe harnesses. They allow the worker to stand up in their harness to ease the discomfort whilst suspended from a lanyard after a fall. Helps release the tension within the harness straps to relieve pressure on the groin which helps prevent loss of circulation to the legs and feet.
Prior to use attach one pack to the outer side of each leg strap. In the event of a fall unzip the pouches to release the straps and thread the plain end through both chrome rings and back through only one and pull tight to form a loop approx shin height. Stand up slowly on the straps and the discomfort will be relieved.
Lightweight and unobstructive.
Weight: 150g

TSTSS Trauma Suspension Straps

Tuffsafe® Safety Boots

The Tuffsafe® BBH 03 is manufactured from hardwearing Nubuck leather upper with a dual density heat resistant polyurethane/rubber soles that are cemented to the upper for durability and extra comfort throughout the day. Deep padded collars with a low profile around the Achilles provide protection for your ankles from knocks and bumps. Padded tongues evenly distribute the pressure of the laces across the bridge of your foot to help ensure a comfortable fit. The 'U' hooks allow for rapid lacing/unlacing and easy fit adjustment of the boot. Leather upper with a dual density antistatic sole.

BBH 03 Nubuck Hiker Safety Boot

Classification: SB.
Manufactured to EN345.
200J steel toecap.
Dual density sole.
Heat resistant sole up to 200°C.

Colour: Honey.
Available in sizes: 6 to 12.

TuffSafe Workwear

TuffSafe workwear is designed and manufactured from the latest technical fabrics to ensure it is hard wearing, comfortable and contemporary styled. Each garment is carefully designed to ensure it is has all the features too appeal to the user who is focused on functionality, and has high demands for the right materials.

Within the TuffSafe collection you will find outer jackets, soft shell jackets, work trousers water proof jackets and trousers and wick away base layers and T-shirts.

Siena Lined Microfleece Jacket

The Siena Microfleece jacket from Tuffsafe? is water repellent, wind resistant and keeps you warm as the microfibre fabric traps warm air next to your body to produce an insulating barrier.

Features of the Siena Microfleece jacket:
Two vertically zipped side pockets and one outer breast pocket.
Fully lined with elasticated cuffs.
Elasticated drawstring waist.
Zipped embroidery access to allow corporate identity to be added.
Anti-pilling treatment to prevent bobbling.

Colours available: Navy Blue or Black.
Sizes range from small (38'') to XXXL (50''/52'').

"Guard Master" Disposable Hooded Coveralls

Type 5/6 coveralls. Disposable coveralls with hood, elastic cuffs, back and ankles. 1-way zip at front with 1-ply stormflap. Made from 55gsm SMS (spunbond, microporous, spunbond) material with inside stitching. For noxious dust and splash. Ideal for dry particulate barrier and repellency. Lightweight and breathable. Liquid repellent. Designed to zip over neck to above the chin to protect exposed neck areas.
EN13034 for limited protection against liquid particles (type 6).
EN13982-1 (type 5) for protection against solid particles.
Comes in blue or white.
Available in five sizes from small to XXL.

Tradesman?s Trousers - Milano

Heavyweight tradesman's trousers with two hip pockets,
two rear pockets and two internal kneepad pockets. Button fasten waistband with large belt loops and zip fly. Rear hanging loop. Double stitched seams and reinforced gusset. 300gsm heavyweight fabric. 65% polyester 35% cotton.
Colour: Navy. Sizes range from 30''W x 31''L to 40''W x 33''L.

Tradesman?s Trousers

Polo shirt - Firenze

Classic heavyweight polo shirt with 3-button placket and colour matched buttons. Double knit pique weave with taped shoulder and neck seams and ribbed collar and cuffs. 230gsm heavyweight fabric. 50% Polyester 50% Cotton. Colours: white, navy blue, sky blue, royal blue, red, burgundy, green and black. Sizes range from small (37''/39'') to XXXL (47''/49'').

Polo Shirt

Cotton Gloves

100% jersey cotton. Knitted wrists and fleece lined. Multi-purpose gloves for lightweight handling. Size 10.

Polo shirt - Firenze

Classic heavyweight polo shirt with 3-button placket and colour matched buttons. Double knit pique weave with taped shoulder and neck seams and ribbed collar and cuffs. 230gsm heavyweight fabric. 50% Polyester 50% Cotton. Colours: white, navy blue, sky blue, royal blue, red, burgundy, green and black. Sizes range from small (37''/39'') to XXXL (47''/49'').

Polo Shirt

Tuffsafe High Visibility Clothing

Tuffsafe high visibility waistcoats, coats, jackets and trousers are manufactured to the exacting standards of BSEN471 1994 to ensure hi-visibility clothing of the highest standard for high-risk environments.

Hi-Vis Highway Jackets

Certifed to EN471 Class 3. PU coated polyester with quilted lining with heavy weight polyester filling. Concealed hood, two-way heavy duty zip front with storm flap and security pocket. Two exterior pockets with storm flaps and inner side breast pocket. Knitted storm cuffs. Internal 'Wicking' strip.
Fully taped weatherproof seams. All highway jackets
have 2 x 50mm reflective sleeve bands.
PREN343 1993:
Class 3 (highest) water penetration.
Class 1 (lowest) water vapour resistance.
BSEN471 1994:
Class 3 area of fluorescent background and retro reflective tape.
BSEN471 1994:
Class 2 retro reflective tape performance.