Tuffsafe® Safety Boots

The Tuffsafe® BBH 03 is manufactured from hardwearing Nubuck leather upper with a dual density heat resistant polyurethane/rubber soles that are cemented to the upper for durability and extra comfort throughout the day. Deep padded collars with a low profile around the Achilles provide protection for your ankles from knocks and bumps. Padded tongues evenly distribute the pressure of the laces across the bridge of your foot to help ensure a comfortable fit. The 'U' hooks allow for rapid lacing/unlacing and easy fit adjustment of the boot. Leather upper with a dual density antistatic sole.

BBH 03 Nubuck Hiker Safety Boot

Classification: SB.
Manufactured to EN345.
200J steel toecap.
Dual density sole.
Heat resistant sole up to 200°C.

Colour: Honey.
Available in sizes: 6 to 12.

Tuffsafe® Safety Boots

The Tuffsafe® BBB 02 has a lightweight heat resistant sole that is ultra flexible for increased comfort, the welted sole construction greatly increases the durability of this boot. Deep padded collars protect your ankles from knocks and bumps and padded tongues evenly distribute the pressure of the laces across the bridge of your foot to help ensure a comfortable fit. The hooks allow for rapid lacing/unlacing and easy fit adjustment of the boot. Leather upper with a dual density antistatic sole.

BBB 02 Welted Safety Boot

Classification: SBP.
Manufactured to EN345.
200J steel toecap.
Steel midsole.
Oil, petrol, water, acid and alkali resistant sole. Heat resistant up to 300°C.

Colour: Black.
Available in sizes: 6 to 12.

Polka-dot Gloves

Cotton backed gloves, with palms and fingers covered with vinyl dots to give high grip. Knitted wrists.

Tuffsafe High Visibility Waistcoats

Tuffsafe high visibility satin yellow waistcoats are manufactured to BSEN471 to ensure hi-visibility clothing of the highest standard for high-risk environments.

High Visibility Waistcoat, Satin Yellow with Reflective Braces 2 Body Bands

These high visibility waistcoats from Tuffsafe are manufactured from high quality lightweight satin yellow polyester mesh, with 50mm retro-reflective bands and have Velcro fastening at the front.

Conform to:
BSEN471 Class 3 area of fluorescent background and retro reflective tape.
BSEN471 Class 2 retro reflective tape performance.
These garments comply with the requirements of directive 89/686/EEC and the above reference standards.

Tuffsafe Nitrile Coated Gloves

With cotton interlock liner. Combines the comfort of cotton with the protection of nitrile. Textured surface, durable and washable. Ideal for assembly, fabrication and handling. Knitted wrist. Fully coated for all round protection.

Lightweight Nitrile

TuffSafe Safety Footwear

Tuffsafe CAB09 Kevlar Composite Safety Ankle Boot is manufactured to EN ISO 20345. Using the latest materials such as Kevlar and Composite technologies we have produced a non-metallic safety ankle boot that is ideally suited for working in areas where security screening is a necessity.

Lightweight dual-density sole with increased comfort and shock absorption also resistant to heat up to 300C.
Non-metallic toecap and midsole.
Resists the build up and conductance of static electricity.

CAB09 Kevlar Composite Safety Ankle Boot

Classification: S1P.
Manufactured to EN345.
Temperature resistant sole to 300C.
200J non magnetic Kevlar toecap and midsole.
PU & Leather upper with antistatic dual density polyurethane/rubber sole with energy absorbing heels for extra comfort.

Colour: Black with green trim.
Available in sizes: 6-12.

Hi-Vis Trousers

Tuffsafe high visibility waistcoats, coats, jackets and trousers are manufactured to the exacting standards of BSEN471 1994 to ensure hi-visibility clothing of the highest standard for high-risk environments.



Heavyweight PVC coated polyester lightweight over-trousers with elasticated waist, two position stud adjustment to legs, two Side pockets with storm flaps and fully taped waterproof seams. Complete with two 50mm reflective bands around each leg.
PREN343 1993: Class 3 (highest) water penetration. Class 1 (lowest) water vapour resistance.
BSEN471 1994: Class 1 area of fluorescent background and retro reflective tape.
BSEN471 1994: Class 2 retro reflective tape performance.

Tuffsafe PU Coated Gloves

Tuffsafe extra grip gloves are manufactured with a 13 gauge seamless knitted nylon liner with elasticated cuffs that has a high grip Polyurethane coating applied to the finger tips and palm, leaving the back open for ventilation.

These gloves provide excellent dexterity and strong abrasion resistance for the handling of fine and dirty objects.

Conforms to EN388.

Nylon Lined PU Coated Gloves

Colour: Grey.

Kevlar Composite Safety Trainer

Manufactured to EN ISO 20345. Using the latest materials such as Kevlar and Composite technologies we have produced a non-metallic safety trainer that is ideally suited for working in areas where security screening is a necessity.
- Lightweight dual-density sole with increased comfort and shock absorption also resistant to heat up to 300°C.
- Non-metallic toecap and midsole.
- Resists the build up and conductance of static electricity.

Kevlar Composite Safety Trainer (CST 10) Size 6

Standard: S1P.
Colour: Black with green trim.
Upper: PU & Leather.
Outsole: EVA/RB.
Size: 6 UK, 39.5 EUR, 7 USA, 25 ASIA.

Tuffsafe PU Coated Gloves

Tuffsafe extra grip gloves are manufactured with a 13 gauge seamless knitted nylon liner with elasticated cuffs that has a high grip Polyurethane coating applied to the finger tips and palm, leaving the back open for ventilation.

These gloves provide excellent dexterity and strong abrasion resistance for the handling of fine and dirty objects.

Conforms to EN388.

Nylon Lined PU Coated Gloves

Colour: Grey.