Disposable Gas & Vapour Pre-assembled Half Mask

The 5000 Series masks from Moldex are convenient and easy to use. Supplied pre-assembled for use in most gas and vapour applications, these effective, disposable respirators combine high performance with the minimum of maintenance and no requirements for record keeping. Purpose designed for enhanced wearer comfort and improved field of vision, the 5000 series masks are lightweight and easy to fit. Gas filter cartridges permanently mounted to the facepiece with built in inhalation valves provide gas and vapour protection. Replaceable particulate filter discs provide dust, mist and fume protection where required.
Improved clogging characteristics enable particulate filters to pass the dolomite clogging test (D).

Construction/materials
5000 Series respirators are made of:
- Facepiece polypropylene, kraton;
- Head strap polyester, natural rubber;
- Clip polyethylene;
- Particulate filter polypropylene;
- Particulate filter holders polypropylene;
- Gas filter activated carbon;
- Gas filter cartridges polypropylene;
- Inhalation valve natural rubber, SBR;
- Exhalation valve synthetic rubber.

The Moldex 5000 Series meet the requirements of EN405:2001,
EN143:2000 and *EN143:1990 and are CE marked in accordance with the requirements of European Directive 89/686/EEC.

Welding Fume Disposable Respirator Mask - Valved

Special purpose disposable mask specifically designed to protect against the respiratory hazards associated with welding processes such as welding fume and ozone plus nuisance odours. Exhalation Cool Flow™ valve to prevent heat and moisture build-up. Conforms to EN149:2001 + A1:2009 FFP2 NR D. 10 x APF.
Supplied in packs of 10.

9925

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

Fit Test Kits

The revision of COSHH Regulations COSHH:2002, requires employers to conduct a fit-test on any employee wearing a tight fitting face pieces. Tight fitting face pieces include disposables, half masks and full face masks. The largest contributor to reduced respiratory protection is poor fit. Fit testing is an important requirement in the process of determining whether a given respirator is the correct respirator for a particular worker. Fit-testing helps determine that a particular model and size of respirator fits a worker so there is minimal face seal leakage. There are 2 fit testing methods: qualitative and quantitative. Generally, qualitative fit testing is acceptable for most disposables and half masks, although quantitative fit testing is required when negative pressure full face piece masks are used.



Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters.

Half Mask Respirator

Introduces unique features and benefits for increased worker acceptance. Lightweight design plus extra-wide sealing area provides all-day comfort. Mask drops down for convenient storage around the neck or locks down for custom fit. Adjustable head cradle and curved neck buckles for extra comfort. Low profile, compact design allows a wide field of vision, fits well under welding helmets and with safety glasses. Maintenance and cleaning are made simple with very few replacement parts. 100% PVC-Free.

7001 Easylock - Small

JSP PowerCap Active Respirator

Spare parts to suit JSP PowerCap Active Respirator (JSP-959-2960K).

Dust/Mist Respirator Mask

Ergonomically pre-shaped for a more comfortable fit & unique DuraMesh design ensures optimum shape retention over long periods and is extremely comfortable to wear. The Ventex Valve uses low pressure valve technology which helps provide optimal airflow & significantly reduces heat & moisture inside the mask. The addition of an ActivForm seal (cushioned flange) in the nose area reduces the possibility of inward leakage by automatically adjusting to different face shapes. This means that unlike other traditional half-masks which rely on a user ?press-to-fit? technique, the Moldex New Generation respirator fits on contact & once attached to the face, the fit is retained & does not need further adjustment. For use against toxic dust, water & oil based fumes, mists & nuisance organic gas relief.
Complies with EN149:1991 FFP2S. Maximum Protection Level 10 x OEL. Pack of 10.

2435

Versaflo™ Accessories

To Suit 3M Versaflo™ Air Respirators

Battery Packs & Chargers

Half Mask Respirator

Introduces unique features and benefits for increased worker acceptance. Lightweight design plus extra-wide sealing area provides all-day comfort. Mask drops down for convenient storage around the neck or locks down for custom fit. Adjustable head cradle and curved neck buckles for extra comfort. Low profile, compact design allows a wide field of vision, fits well under welding helmets and with safety glasses. Maintenance and cleaning are made simple with very few replacement parts. 100% PVC-Free.

7003 Easylock - Large

Powered Air Starter Kit

Simple starter kit with all the component parts to get you up and running. Simply add the headtop you require. Approved to EN12941.
Kit contents:
rbo unit.
Particle filter.
Pre-filter.
Standard belt.
Battery & charger
Breathing tube.
Air flow indicator.