Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Round File - Straight

With tough enamelled alloy bodies and high carbon heat treated steel blades.



For convex and concave surface shaping. Wooden handle.
Blade length: 255mm.
Blade width: 16mm.
Overall length: 360mm.

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Flat Bits

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Kennedy Chalk Line Refills

Suitable for all chalk lines. Good colour fastness and weather resistance. Supplied in squeezable bottle. Available in three colours: Blue for general use externally and internally. Red for exterior masonry work indelible in use. White for interior use such as fixing a dado rail.

250gm

Kennedy Professional Hand Saws

The fast cutting Meteor hand saw from Kennedy Professional is a 550mm (22'') long saw with a hardened & tempered steel blade that have stay sharp hardened teeth, sharpened on 3 edges to ensure the blade's teeth cut on both the forward stroke and the back stroke. Each saw is fitted with a dual material grip handle handle for comfort and a finger line for accurate cutting.

The Meteor is ideal for cutting chipboard, block board, timber, plywood, hardboard, plasterboard, PVC & laminates!

Available as:
7TPI coarse cut saw Order code: KEN-597-4900K.
11TPI fine cut saw Order code: KEN-597-4920K.

Meteor? Hand Saw Coarse Cut

Bevel Edge Wood Chisels

Designed to give a life time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. 'C.A.B.' (cellulose acetate butyrate handles).

Craftsman

Hammer-blow resistant handles. For craftsmen and joiners.

Trammel Heads

Supplied as a pair. To be used in conjunction with any wood offcut between 3/4" to 11/2" wide, minimum thickness of 3/8". Suitable for scribing arcs and circles.

Adjustable Hole Cutter

For use on metal, wood, plastics, laminates and leather etc. Cutting diameter can be infinitely varied within range. Graduated scale with locking screw. For use in 3 jaw chucks (6.4mm shank). Maximum cutting thickness: metal 2mm, wood 8mm. Overall length: 95mm.

Spares for Kennedy Combination Squares and Rules

Locking Nut & Mandrel:
For 6" Combination Square (KEN-597-7060K)
For 12" Combination Square (KEN-597-7120K)