Magnetic Trays

Heavy duty tool/parts tray with durable hardwearing corrosion resistant powder coated finish. High strength permanent magnets with protective rubber coating ensure the tray securely attaches to any flat ferrous metal surface, without damaging it. The extended rear stabilizing plate with protective rubber guard increases the force required to remove the magnets from the surface their attached to, increasing the holding capacity of the tray.Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment..



Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
Three high strength permanent magnets. Tray size: 210 x 115 x 31mm (81/5 x 41/2 x 11/5")
Rear stabilizing plate size: 210 x 125 mm (8" x 5")
Weight capacity: 800g.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Drawer Liners/Top Mats

For cabinet and chest compatibility, please refer to our catalogue.

Yamoto? Roller Cabinets and Tool Chests

The Yamoto? workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

6 Drawer Tool Chest

The Yamoto? 6 drawer Tool chest is ideal for use with Yamoto? roller cabinets for storing tools in the.

Features
Ribbed back panel for extra rigidity.
Epoxy powder coated finish in yellow/grey with chrome finished PVC drawer pulls.
The fully locking fold down lid
Supplied complete with foam liners.
Quick release smooth running 250mm ball bearing drawer slides. Supplied with a loose tote tray for carrying tools to work area. Strong chrome carrying handles.
Drawer loads should be evenly distributed.

Colour: Yellow with grey drawer fronts.

Overall Dimensions (WxDxH): 668x315x389mm.
Top Compartment (WxDxH): 660x305x50mm.
Tote Tray (WxDxH): 430x170x45mm.
Drawer Sizes (WxDxH):
1 Drawer 590x279x101mm,
2 Drawers 590x279x49mm,
1 Drawer 281x279x49mm,
2 Drawers 127x279x49mm.
Weight: 22.2Kg

Kennedy High Impact Resistant Tool Case

Manufactured from HDPE resin with extra thick aluminium trim for a tight closure. Fitted with a single steel fully riveted hinge, two chromed locks with keys, four rubber feet, heavy duty handle, a telescopic handle and large wheels for easy transportation. Inside there is a removeable and a hinged tool board, both with 30 elasticated tool loops, document wallet, three small parts organisers and a large base compartment for tools, accessories and spare parts.
Designed to be stacked and is ideal for widely travelled engineers that carry tools, spare parts and components.

Yamoto? Roller Cabinets and Tool Chests

The Yamoto? workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

7 Drawer Roller Cabinet

The Yamoto? 7 drawer roller cabinet is ideal for storing tools in the workshop fitted with large heavy duty casters that allow the cabinet to be relocated as required.

Features:
Ribbed back panel for extra rigidity.
Epoxy powder coated finish in yellow/grey with chrome finished PVC drawer pulls.
Fully opening drawers for extra accessibility.
Quick release smooth running 350mm ball bearing drawer slides. Supplied with rubber top mat and foam drawer liners.
Fully locking.
Four hard wearing heavy duty castors, 2 swivel castors fitted with brake.
Strong 450mm wide handle.
Drawer loads should be evenly distributed.

Colour: Yellow with grey drawer fronts.

Overall dimensions (WxDxH): 755x530x860mm.
Drawer sizes (WxDxH):
4 Drawers 590x409x49mm.
2 Drawers 590x409x101mm.
1 Drawers 590x409x206mm.
Weight: 48.9Kgs
(The maximum product weight, including contents must not exceed 160kg).

Kennedy Extra Large Roller Tool Cabinets

Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Uses 14" drawer slides and Type B lid stays.

7 Drawer Extra Large Roller Tool Cabinet

Overall dimensions: (W)1060 x (D)480 x (H)925mm.
Internal compartment dimensions
Bottom compartment (W x D x H):
400 x 460 x 300mm.
400 x 460 x 415mm.
Drawer sizes (W x D x H):
580 x 415 x 50mm (4).
580 x 415 x 100mm (2).
580 x 415 x 150mm (1).

Drawers/Dividers for Senator® Small Parts Storage Cabinet Range

Drawers:
Small: (H)36.5 x (W)54 x (L)140mm
Medium: (H)59 x (W)140 x (L)140mm
Large: (H)59 x (W)280 x (L)140mm

Dividers:
Small: 50 x 29mm (Pk 10)
Medium/Large: 133 x 50mm (Pk 5)

60 Drawer Small Parts Storage Cabinet shown for illustration purposes only (SEN-593-5220K)

4-in-1 Mobile Work Station

The ideal solution for tradesmen who need to transport large amounts of equipment and materials to the worksite. It has a telescopic handle for easy manoeuvrability and opens up easily into a 4 level workstation. The giant lower bin is ideal for bulky materials and equipment such as paint cans, large components and power tools. The tool box has a lift-out tray for smaller tools, which fits neatly into the fold-out lid. There is also a large adjustable organiser for nails, screws and other small components.
Dimensions (W x H x D): 549 x 733 x 413mm

FatMax Cantilever Rolling Workshop

Kennedy Tool Pouches, Holsters and Belts

Kennedy tool pouches, tool holsters and belts are for the professional tradesman or the keen DIY'er. They are an ideal way to keep your tools close at hand when on site.

Our range includes products suitable for both indoor and outdoor use. They are available in a choice of materials from fully waterproof oil tan leather, full grain leather, split or suede leather or man made nylon and polyester fabrics.

Plier Holster

The Kennedy Plier Holster is Manufactured from suede & russet leathers. Fully stitched and riveted at corners - double riveted at base. Two slots for belt attachment.
100x45x30mm Tool pocket.

Belt not included.
Tools Not included.

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.