Kennedy Small Parts Storage Cabinets

Manufactured from heavy gauge steel, painted finish with impact resistant transparent polypropylene drawers, allowing contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise use of storage space.

Storage Cabinet with 25 Drawers

Cabinet size: (H)238 x (W)306 x (D)155mm.
25 Drawers: (H)36.5 x (W)54 x (D)140mm.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Castors

For cabinet and chest compatibility, please refer to our catalogue.

Senator® Tool Chest

For the cost conscious, DIY and light industrial use. Two part epoxy powder paint finish. Piano hinged lid, carry handles, tote tray, fully locking, 2 wall construction side panels, I-beam drawer slides.

6 Drawer Tool Chest

Overall dimensions (W x D x H): 668 x 316 x 386mm.
Drawer sizes (W x D x H):
50 x 125 x 280mm (2).
50 x 280 x 280mm (1).
50 x 590 x 280mm (2).
100 x 590 x 280mm (1).

Tool Box with Tote Tray

Manufactured from impact resistant high-density plastic. Internal eight compartment tote tray. Features moulded metric rule on the lid, lid locking clasps and sturdy plastic handle that also locks lid shut when lifting. Padlock hole and piano hinges. Dimensions (W x D x H): 445 x 240 x 220mm.

Jumbo Tool Bag

Manufactured from a 100% cotton natural fibre. Canvas is a hard wearing, high strength and abrasion resistant material. It can be proofed to improve water resistance. Resistant to oil and some solvents.



Heavy duty double thickness canvas. 5 internal pockets and a fibre board base with 6 riveted metal feet. Webbing handles and straps with plastic buckles.

Electricians Tool Bag

Manufactured from heavy-duty tear-resistant material with reinforced stitched edging. Velcro fastening flap with soft touch carry handle and double webbed shoulder strap, fixed with metal release clasps. Supplied with two small organiser cases which are stored in two outer pockets. Two removable tool boards (one velcro fastened) are kept inside which have a unique built-in tool storage securing system.

EXTRA HEAVY DUTY TOOL CHEST & CABINETS

This cabinet is made from a heavier gauge steel, welded and riveted to give this Extra Large cabinet an extremely rigid construction. The corrosion resistant powder coated finish provides superb durability. The locking mechanism locks all the closed drawers which have individual safety catches to prevent accidental opening. The cabinet has four heavy duty castors, two fixed and two swivel which when combined with the heavy duty side handle enable the user to move it with ease. All drawers have smooth running ball bearing drawer slides, aluminium edged handles.
Drawer dimensions (W x D x H):
1 x (560 x 390 x 40mm)
4 x (560 x 390 x 65mm)
1 x (560 x 390 x 95mm)
1 x (560 x 390 x 205mm)

Overall measurements including handles: 740 x 460 x 995mm.

Extra Heavy Duty Roller Cabinet

4 Drawer Tool Chest

Manufactured from hi-impact co-polymer Polypropylene. Features 4 sliding drawers enclosed with a slide clasp front panel to prevent opening whilst in transit. Top carry handle with soft touch grip zone and large locking clasps. Metric graduated V groove in the lid securely holds work piece while being cut. Front cover panel and lid have aligning padlock hole for optional added security. Dimensions: (W x D x H): 450 x 250 x 325mm.

Tote Bag

This Irwin tool tote bag has a wide open design for quick tool recognition, a rigid frame with padded handle and adjustable straps for level or blueprints. The tool tote accomodates bulk and vertical storage with eight pockets outside, three inside and convenient outer pockets to keep tools close at hand.

10506532

Sentri XLOCK Flambox

Substantial construction from 1.2mm, 1.6mm, 2mm and 2.5mm sheet steel with powder coated finish and an advanced XLOCK - four point locking system. This system operates with one lock and one key and has worldwide patents pending. All boxes are supplied with two keys and are numbered for an optional replacement key service. Fitted with anti-jemmy bars all round, twin hydraulic arms, drop down handles and a full width split heavy duty piano hinge. Covered by a three year's manufacturer's warranty for defective parts.

Sentri XLOCK Flambox

FV442
Made from 2mm and 2.5mm sheet steel with a red powder coated finish fitted with removable drip tray to contain spillage. High and low level louvred venting with internal mesh to allow fumes to escape. With warning label and forklift/pallet truck skids with a facility for bolting wheels.

Overall size (L x H x W): 1168 x 600 x 1275.
Internal size (L x H x W): 1130 x 570 x 1200mm.

Weight: 50kg.

Delivery subject to availability.