Kennedy Small Parts Storage Cabinets

Manufactured from heavy gauge steel, painted finish with impact resistant transparent polypropylene drawers, allowing contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise use of storage space.

Storage Cabinet with 8 Drawers

Cabinet size: (H)282 x (W)306 x (D)155mm.
8 Drawers: (H)59 x (W)140 x (D)140mm.

Box Inserts

Suitable for use in 250 series cabinet drawers, compact toolboxes and service cases to clearly separate small components or tools. Can be mixed and matched to meet your specific storage needs. Manufactured from opaque polypropylene, resistant to cracking, low temperatures and acid.

Kennedy Professional Roller Tool Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

3 Drawer Roller Tool Cabinet
Overall size (W x D x H): 690 x 460 x 890mm.
Drawer sizes (W x D x H): 591 x 410 x 102mm (3).
Bottom compartment (W x D x H): 610 x 432 x 356mm.

What "Car Mechanics" magazine say..."Best Buy"

"Amazing value for such a high quality product. Everything about this cabinet is well designed, almost to the point of blatant over engineering. The large wheels are metal, with rubber strip "tyres" around their edges. There are even grease screws fitted, so the bearings can be lubricated. All drawers feature positive stop resistance, which means they need a good yank to open – so you don't need to lock them prior to moving the cabinet. Roller bearing slides are used throughout, and even the keys are an unusual, high security, design."

Kennedy Plastic Toolboxes

The Kennedy TTO480 tool box is manufactured from impact resistant high-density plastic. It is supplied complete with an internal eight compartment tote tray with retractable carry handle and a 16-compartment small parts organiser.

TTO480 480mm (19'') Plastic Tool Box with Tote Tray & Organiser

Features include:
Small parts organiser with transparent lid.
Metric rule on the lid, lid locking clasps and sturdy plastic handle that also locks lid shut when lifting.
Tote tray with retractable handle
Padlock hole .
Overall Dimensions: 480x240x260mm (LxWxH).

Drawers for the 1200 Series Cabinets

Dividers sold separately

Senator® Roller Cabinets and Tool Chests

The Senator® workshop tool storage range contains tool chests and roller cabinets that are ideal suitable for any workshop or garage. Manufactured from heavy gauge steel and finished with a corrosion resistant epoxy powder coating.

3 Drawer Tool Chest

Features included all steel welded construction with full length piano hinge. The drawers are on 250mm (10") extendible sliders. Lockable lid with cantilever top tray.
Overall dimensions (WxDxH): 520x220x304mm.
Cantilever Tray (WxDxH): 500x115x50mm.
Top Compartment (WxDXH): 510x210x60mm.
Drawer sizes (WxDxH): 3@ 450x190x55mm.

Tool Boxes

Robust stacking unit for containing four lockable organiser cases, which lift and slide out. The expandable system allows units to be attached on top or side by side. Cases have translucent lid for selecting contents and multi-positional compartment separators. Used for storing up to 4 service cases.
Dimensions (L x W x H): 425 x 350 x 375mm.
Maximum Load: 6kg

It is recommended that no more than 3 organisers should be stacked at one time.

Service Case Organiser

Drawers/Dividers for Kennedy Small Parts Storage Cabinet Range

Drawers:
Small: (H)36.5 x (W)54 x (L)140mm
Medium: (H)59 x (W)140 x (L)140mm
Large: (H)59 x (W)280 x (L)140mm

Dividers:
Small: 50 x 29mm (Pk 10)
Medium/Large: 133 x 50mm (Pk 5)

Small Parts Storage Cabinet shown for illustration purposes (not included)

Yamoto Tool Boxes

Yamoto's steel toolboxes are powder coated for rust-resistance and durability! A soft grip carrying handle and lightweight design ensures comfort even when carrying fully laden and the black plastic overriders add to the overall ruggedness helping to prevent damage to the box or items around it. TheYamoto's steel toolboxes have an attractive hard wearing and corrosion resistant powder coated finish. A soft grip carrying handle and lightweight design ensures comfort even when carrying fully laden and the black plastic over riders add to the overall ruggedness helping to prevent damage to the box or items around it. The lid has 'V' section to allow measuring and cutting short lengths of pipe while inside there is a tote tray for smaller items (the 450mm tote has a metric scale on each long edge). To ensure security each tool box is fitted with heavy duty metal latches designed to stay closed even when in transit. Ideal for on-site use. lid has 'V' section to allow measuring and cutting short lengths of pipe while inside there is a tote tray for smaller items (the 450mm tote has a metric scale on each long edge). To ensure security each tool box is fitted with heavy duty metal latches designed to stay closed even when in transit. Ideal for on-site use.

4 Drawer Parts Cabinet

Manufactured from hi-impact co-polymer Polypropylene with opaque drawers for viewing contents. 3 section top compartment with opaque lid and moulded snap clasps to prevent accidental opening. Each internal sliding transparent drawer features 3 removable dividers and locking mechanism to prevent the drawer opening whilst in transit. Recessed top carry handle and locating lugs allows stacking of multiple cabinets. Dimensions: (W x D x H): 390 x 200 x 340mm.