Kennedy Tool Control Cabinet Set

Professional Pliers:- 1x 160mm snipe nose, 1x 160mm diagonal cutters, 1x 160mm combination.
Metric Professional Combination Wrenches:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm.
Pro-Torq screwdrivers: Crosspoint: No.2 x stubby, No.2 x 100mm, Pozidriv(r): No.1 x 75, No.2 x 100, No.3 x 150mm, Flared: 6.3 x 150, 8.0 x 200mm, Parallel: 5.0 x 150mm

25 Piece Set With Professional Roller Cabinet TCC025

300 Piece Engineers Professional Tool Kit - EPT300

Supplied in a 5 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. 3 drawer top chest. Top compartment size: 89 x 661 x 150mm. Drawer sizes: 1 51 x 591 x 282.5mm, 2 102 x 591 x 282.5mm, 5 drawer roller cabinet, internal drawer dimensions: Drawers: 4 591 x 460 x 102mm. Drawers: 1 591 x 410 x 204mm.
Set of 25 HSS drills 1-13.00mm X 0.5mm 8 piece 200mm (8`) double cut engineers file set 16cm (6.1/2`) cut 2 assorted needle file 20 x 150mm (6") junior hacksaw blades 10 x 12`x1/2`X18tpi HSS all hard hacksaw blade 25 x 230mm x 280mm assorted emery sheets 200mm (8`) soft grip phosphate djustable wrench 6 x 150mm flat cold chisels 3` 18-bld. Met/imp comb feeler gauge set 4`x3/16`(4.8mm) square head centre punch Set of 6 parallel pin punches 150mm/6" imp/metric rigid rustless rule 300mm/12` rigid rustless rule - round end 150mm (6") engineers square 300mm (12") engineers square 7" double ended engineers scriber 1.1/4" focal length eye loupe Adjustable telescopic 1 1/4` mirror Set of 2 - 1/16-1/4` & 1/4-3/4` tap wrenches 1lb ball pein hammer - wood shaft 16oz black rubber mallet - wood shaft 5.1/2` Plastic handle household scissors 8.1/2` Plastic handle household scissors 5m/16" professional ABS steel tape Snap-off 8 seg-blade heavy duty economy knife Retractable trimming knife c/w 5 blades Beaver style junior hacksaw Professional "plus" cushion grip hacksaw Magnetic pick-up tool Set of 4 Pro-Torq pliers 10" curved jaw grip wrench 12 piece Pro-Torq screwdriver set 64 Piece 1/4` hexagon bit set 1/4` hex bit driver 7 Piece box spanner set 6-19mm c/w tommy bars 10 piece combination spanner set 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm. 50 Piece metric 3/8` square drive socket set 8` Straight blade tinsnip 3 Drawer professional tool chest 5 Drawer professional roller cabinet 8 Piece Metric Pro-Torq hex wrench set on clip 9 Piece imperial Pro-torq hex wrench set on clip kraft boxs 610 X 420 X 150mm 19mm x 33m black PVC insulation tape

Senator® Quality Tooling Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Home Handyman Tool Kit

Contents:
• Tool box with tote and wheels.
• 8 piece fluted handle screwdriver set: flared 6mm stubby, 3 x 100mm and 8 x 200mm; parallel 3.2 x 75mm and 4 x 150mm; posidriv No.2 Stubby, No.1 x 75mm and No.2 x 100mm.
• 10 piece screwdriver bit set: 6mm quick release hex bit adaptor; flat 3, 4, 5, 6, and 8mm; crosspoint No.0, 1, 2 and 3mm.
• 18 piece wood, metal and masonry drill set 3, 4, 5, 6, 8 and 10mm bits. • IDH013 240V 13mm impact drill.
• 200mm (8”) chrome vanadium adjustable spanner.
• 225mm (9”) hi-vis magnetic boat level.
• 600mm (24”) hi-vis girder section level.
• 19mm x 33m black PVC insulation tape.
• 150mm euro tester range 125/250V.
• Adjustable telescopic 300mm diameter inspection mirror.
• Magnetic pick-up tool extends to 650mm.
• Bradawl.
• 450g (16oz) claw hammer wood shaft.
• 3m/10ft Senator hi-vis locking tape.
• 13 segment 9mm standard snap-off blade knife.
• Retractable trimming knife c/w 5 blades.
• Junior hacksaw frame c/w hardened blade.
• DIY hacksaw frame.
• 177mm (7”) plastic handled multi-purpose household scissors.
• 63mm (21/2”) half tang filling knife.
• 76mm (3”) half tang scraper.
• 150mm (6”) linesman’s plier.
• 125mm (5”) snipe nose plier.
• 125mm (5”) diagonal cutting nipper.
• 255mm (10”) straight jaw grip wrench.
• 22” x 8pts homesaw hand saw.

1000V Dual Grip Insulated Screwdriver & Plier Set

Fully insulated professional high grip dual material handles that are VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole in handle. Pliers have chrome vanadium steel double polished head and joint heads and are suitable for production line environments.



Set contents:
Screwdrivers: Crosspoint No.0 x 60mm, No.1 x 80mm, No.2 x 100mm, Parallel tip 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm.
Pliers:
6,3/8" Pro-Torq snipe nose pliers,
6,1/4" Pro-Torq grip nipper pliers,
6,1/2" Pro-Torq engineering combination pliers.

AET100 107 Piece Apprentice Engineer's Tool Kit

Supplied in a robust toolbox c/w double latch.

Contents:
6 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75 and No.2 x 100mm, Flared 6.3 x 100 and 8.0 x 250mm, Parallel 5 x 100 and 5 x 200mm.
6 piece precision screwdriver set: Crosspoint PH0 and PH1, Parallel 1.4, 2.0, 2.4 and 3.0mm.
10-17mm 8 piece metric combination spanner set.
9 piece metric hex key set: 1.5-10mm.
8 piece 2nd cut file set: 1 each flat, hand, round, half round, 3 square and square.
12 piece 2nd cut needle file set: 1 each: hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
2 of each grade 0, 1 and 2 emery sheets.
Adjustable spanner 25mm capacity.
18 blade metric/inch feeler gauge.
Magnetic pick-up tool extends to 650mm.
7.5m/25ft locking tape rule.
Snap-off blade knife.
Junior hacksaw.
20 junior hacksaw blades.
300mm (12") hacksaw frame.
6 hacksaw blades.
General-purpose shears.
160mm snipe nose pliers.
160mm diagonal cutting pliers.
160mm combination pliers.
255mm straight jaw grip wrench.
6mm x 150mm flat cold chisel.
450g ball pein hammer.
175mm engineers' scriber.
30mm diameter inspection mirror (extends to 650mm).
150mm (6") engineers' square.
Centre punch.
150mm (6") pocket rule.
100cc grease gun.
Eye loupe.

Senator® Quality Tooling Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

22 Piece Builders' Construction Toolkit

9" (225mm) hi-vis magnetic boat level. 24" (600mm) hi-vis girder section level. 6" London pattern pointing trowel. 11,1/2" x 4,1/2" plasterers' finishing trowel. 1,1/2" ball pein hammer with hickory shaft. 16oz claw hammer with wooden shaft. 3m/10ft hi-vis locking tape with yellow casing. 30m/100ft fibre glass measuring tape. Retractable trimming knife. 6" diagonal cutting nipper. 8" linesmans' pliers. 8 piece fluted handle screwdriver set. 8" straight blade tinsnip. 24" canvas tool bag.

22 Piece Plumbers Kit

22 Piece Plumbers Kit supplied in a robust toolbox c/w double latch.Contents: 255mm (10") stillson wrench. 3 - 22mm capacity tubing cutter. 3 - 41mm tube deburrer. 9.5 - 32mm basin wrench. 300mm girder section spirit level. Telescopic inspection mirror. Junior hacksaw frame c/w hardened blade. Pad saw. 255mm groove slip joint waterpump plier. 6 piece flat wood bit set 9.5 - 25mm230mm . 12mm x 12M ptfe thread sealing tape to bs6920. 100gm fluxite paste. Powerflow lead free solder 3.25mm 250g. 3 row plastic handle wire scratch brush. 450 gm (1lb) grade 2 wire wool. Blow lamp & 2175 gas cartridge.

Kennedy Tool Control Cabinet Set

Pro-Torq screwdrivers:
Crosspoint: No.2 x stubby, No.2 x 100mm,
Pozidriv(r): No.1 x 75, No.2 x 100, No.3 x 150mm,
Flared: 6.3 x 150, 8.0 x 200mm,
Parallel: 5.0 x 150mm.
Professional Pliers:
1x 160mm snipe nose,
1x 160mm diagonal cutters,
1 x 160mm combination.
Metric Professional Combination Wrenches: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm.
Deep sockets: 10, 11, 12, 13, 14, 15, 17, 19 and 22mm.
Screwdriver bits: Slotted 5, 5.5 and 6.5mm, Crosspoint No.1, 2, 3, and 4, Hex Bits: 3, 4, 5, 6, 8 and 10mm.
Accessories: ratchet handle, sliding T-handle, spinner handle, swivel handle, universal joint, 125 and 250mm extensions, 250mm wobble extensions, 1/4" and 1/2" male adaptors, 1/4" hex bit coupler.

7 Drawer Tool Control Cabinet Set (75 Pieces)

7 Piece Maintenance Tool Kit - MTK7

For everyday use. Supplied in PVC tool roll.

Kennedy Basic Service Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

Basic Service Tool Kit (56 Pieces)

Contents:
430 x 340 x 160mm abs plastic, aluminium reinforced, tool case.
150mm chrome adjustable wrench.
19mm x 33m black PVC insulation tape.
150mm mains tester range 125/250V.
Soldering iron 25W 240V.
Desoldering gun.
17g 1.0mm dia 60/40 cored solder.
115mm sharp nose precision tweezers.
30mm diameter inspection mirror (handle extends up to 480mm). 7.5m/25ft steel tape.
13 segment-blade mini autolock retract knife.
Junior hacksaw frame and blade.
Magnetic pick up tool (extends to 550mm).
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm engineers' combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision nippers.
115mm precision end cutting nippers.
Chrome vanadium blade screwdrivers: crosspoint No.0, 1 and 2PT, slotted 6mm, supadriv No.0, 1 and 2PT.
Offset screwdrivers: 5mm slot x No.1 pt, 6mm slot x No.2 pt. Insulated screwdrivers: parallel 4 x 100mm 1000V VDU, slotted 2.5 x 85mm. 20mm sash tool.
11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.