Kennedy Tool Control Cabinet Set

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22mm. Deep Sockets: 10, 11, 12, 13, 14, 15, 17, 19 & 22mm. Screwdriver Bits:- Slotted 5, 5.5 and 6.5mm. Crosspoint: No.1, 2, 3, and 4. Hex Bits: 3, 4, 5, 6, 8 and 10mm. Accessories: Ratchet handle, sliding T-handle, spinner handle, swivel handle. Universal joint. 125 and 250mm extensions, 250mm wobble extensions, 1/4" and 1/2" male adaptors, 1/4" hex bit coupler.

50 Piece Set With Professional Roller Cabinet TCC050

Kennedy Basic Service Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

Basic Service Tool Kit (56 Pieces)

Contents:
430 x 340 x 160mm abs plastic, aluminium reinforced, tool case.
150mm chrome adjustable wrench.
19mm x 33m black PVC insulation tape.
150mm mains tester range 125/250V.
Soldering iron 25W 240V.
Desoldering gun.
17g 1.0mm dia 60/40 cored solder.
115mm sharp nose precision tweezers.
30mm diameter inspection mirror (handle extends up to 480mm). 7.5m/25ft steel tape.
13 segment-blade mini autolock retract knife.
Junior hacksaw frame and blade.
Magnetic pick up tool (extends to 550mm).
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm engineers' combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision nippers.
115mm precision end cutting nippers.
Chrome vanadium blade screwdrivers: crosspoint No.0, 1 and 2PT, slotted 6mm, supadriv No.0, 1 and 2PT.
Offset screwdrivers: 5mm slot x No.1 pt, 6mm slot x No.2 pt. Insulated screwdrivers: parallel 4 x 100mm 1000V VDU, slotted 2.5 x 85mm. 20mm sash tool.
11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

Senator® Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

90 Piece Engineers' Tool Kit

24 piece 1/2" drive metric socket set.
6 piece 16cm cut 2 assorted needle file set.
10x 12 x 1/2" x 18tpi all hard hacksaw blades.
8"/200mm chrome vanadium adjustable spanner.
12" Rule - walleted.
Metric/inch feeler gauge 60mm blade length.
1.1/2lb ball pein hammer- hickory shaft.
16oz black rubber mallet - wood shaft.
5M/16ft locking tape rule - chromed case.
8 seg 18mm heavy duty snap-off blade knife.
Retractable trimming knife.
DIY hacksaw.
2x 50mm G clamps.
2x 100mm G clamps.
6" snipe nose plier/side cutter.
6" diagonal cutting nipper.
7" linesman plier.
10" multiple slip joint plier.
10" straight jaw high strength grip wrench.
16 function 10-blade tool.
15 piece duel grip screwdriver set.
14 piece 6-19mm drop forged open ended spanner set.
All supplied in a Senator 21" steel cantilever toolbox

AET100 107 Piece Apprentice Engineer's Tool Kit

Supplied in a robust toolbox c/w double latch.

Contents:
6 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75 and No.2 x 100mm, Flared 6.3 x 100 and 8.0 x 250mm, Parallel 5 x 100 and 5 x 200mm.
6 piece precision screwdriver set: Crosspoint PH0 and PH1, Parallel 1.4, 2.0, 2.4 and 3.0mm.
10-17mm 8 piece metric combination spanner set.
9 piece metric hex key set: 1.5-10mm.
8 piece 2nd cut file set: 1 each flat, hand, round, half round, 3 square and square.
12 piece 2nd cut needle file set: 1 each: hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
2 of each grade 0, 1 and 2 emery sheets.
Adjustable spanner 25mm capacity.
18 blade metric/inch feeler gauge.
Magnetic pick-up tool extends to 650mm.
7.5m/25ft locking tape rule.
Snap-off blade knife.
Junior hacksaw.
20 junior hacksaw blades.
300mm (12") hacksaw frame.
6 hacksaw blades.
General-purpose shears.
160mm snipe nose pliers.
160mm diagonal cutting pliers.
160mm combination pliers.
255mm straight jaw grip wrench.
6mm x 150mm flat cold chisel.
450g ball pein hammer.
175mm engineers' scriber.
30mm diameter inspection mirror (extends to 650mm).
150mm (6") engineers' square.
Centre punch.
150mm (6") pocket rule.
100cc grease gun.
Eye loupe.

25 Piece Decorators Preparation Kit

Contents:
5 x dust masks 5 x sheets grade 0 glass paper & grade 2 glass paper 50mm half tang scraper 75mm half tang scraper 38mm chisel point half tang putty knife 200mm half tang combination shavehook. Window scraper Sanding block - fine & medium. 310ml cartridge of decorators acrylic chaulk. 310ml cartridge gun - plastic. 460mm canvas tool bag.

'Live Line' VDE Tool Kit - 17 Piece

Supplied in heavy duty tear resistant tool roll with reinforced stitched edging. 2 metal rings for hanging on to a wall when opened. 20 pockets, 18 elasticated tool loops are stitched on the inside. A velcro fastening secures the roll when shut with a riveted carry handle on the outside.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools VDE approved.

Yamoto Starter Mechanics' Toolkit

Contents:
8" and 12" satin chrome adjustable wrench set.
5m/16ft locking tape rule.
Lightweight hacksaw frame.
400cc lever type steel grease gun.
150mm long nose pliers.
200mm long nose pliers.
150mm diagonal nippers.
150mm linesmans' combination pliers.
200mm linesmans' combination pliers.
250mm waterproof pliers.
12 piece mechanics' pattern screwdriver set.
7 piece 6-19mm chrome vanadium open ended spanner set.
14 piece 6-19mm chrome vanadium combination spanner set.
55 piece 3/8" drive socket and bit set.
6 drawer red tool chest.

Starter Mechanic's Toolkit - 100 Pieces

Kennedy Pro-Torq® Tool Kits

This Kennedy Pro-Torq® tool roll kit is ideal for maintence or service engineers it contains 45 Kennedy Pro-Torq? tools including screwdrivers, pliers spanners, a magnetic pick up tool, for the complete list of contents please refer to our catalogue; all supplied in a heavy duty tear resistant tool roll with reinforced stitched edging that has 2 metal rings for hanging on to a wall when opened. The tool roll has 20 storage pockets, 18 elasticated tool loops to securely hold tools in place. A Velcro fastening secures the roll when shut with a riveted carry handle on the outside.

Pro-Torq® Maintenance Tool Roll Kit - 45 Piece

Kennedy Pro-Torq® tools have a dual material grip handle designed to allow the application of the required force with the minimum amount of effort. The Pro-Torq? grips are securely bonded to each tool and are manufactured with a polypropylene core for strength, durability and have a soft thermoplastic outer for a non-slip comfort grip.

Senator® Quality Tooling Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Home Handyman Tool Kit

Contents:
• Tool box with tote and wheels.
• 8 piece fluted handle screwdriver set: flared 6mm stubby, 3 x 100mm and 8 x 200mm; parallel 3.2 x 75mm and 4 x 150mm; posidriv No.2 Stubby, No.1 x 75mm and No.2 x 100mm.
• 10 piece screwdriver bit set: 6mm quick release hex bit adaptor; flat 3, 4, 5, 6, and 8mm; crosspoint No.0, 1, 2 and 3mm.
• 18 piece wood, metal and masonry drill set 3, 4, 5, 6, 8 and 10mm bits. • IDH013 240V 13mm impact drill.
• 200mm (8”) chrome vanadium adjustable spanner.
• 225mm (9”) hi-vis magnetic boat level.
• 600mm (24”) hi-vis girder section level.
• 19mm x 33m black PVC insulation tape.
• 150mm euro tester range 125/250V.
• Adjustable telescopic 300mm diameter inspection mirror.
• Magnetic pick-up tool extends to 650mm.
• Bradawl.
• 450g (16oz) claw hammer wood shaft.
• 3m/10ft Senator hi-vis locking tape.
• 13 segment 9mm standard snap-off blade knife.
• Retractable trimming knife c/w 5 blades.
• Junior hacksaw frame c/w hardened blade.
• DIY hacksaw frame.
• 177mm (7”) plastic handled multi-purpose household scissors.
• 63mm (21/2”) half tang filling knife.
• 76mm (3”) half tang scraper.
• 150mm (6”) linesman’s plier.
• 125mm (5”) snipe nose plier.
• 125mm (5”) diagonal cutting nipper.
• 255mm (10”) straight jaw grip wrench.
• 22” x 8pts homesaw hand saw.

300 Piece Engineers Professional Tool Kit - EPT300

Supplied in a 5 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. 3 drawer top chest. Top compartment size: 89 x 661 x 150mm. Drawer sizes: 1 51 x 591 x 282.5mm, 2 102 x 591 x 282.5mm, 5 drawer roller cabinet, internal drawer dimensions: Drawers: 4 591 x 460 x 102mm. Drawers: 1 591 x 410 x 204mm.
Set of 25 HSS drills 1-13.00mm X 0.5mm 8 piece 200mm (8`) double cut engineers file set 16cm (6.1/2`) cut 2 assorted needle file 20 x 150mm (6") junior hacksaw blades 10 x 12`x1/2`X18tpi HSS all hard hacksaw blade 25 x 230mm x 280mm assorted emery sheets 200mm (8`) soft grip phosphate djustable wrench 6 x 150mm flat cold chisels 3` 18-bld. Met/imp comb feeler gauge set 4`x3/16`(4.8mm) square head centre punch Set of 6 parallel pin punches 150mm/6" imp/metric rigid rustless rule 300mm/12` rigid rustless rule - round end 150mm (6") engineers square 300mm (12") engineers square 7" double ended engineers scriber 1.1/4" focal length eye loupe Adjustable telescopic 1 1/4` mirror Set of 2 - 1/16-1/4` & 1/4-3/4` tap wrenches 1lb ball pein hammer - wood shaft 16oz black rubber mallet - wood shaft 5.1/2` Plastic handle household scissors 8.1/2` Plastic handle household scissors 5m/16" professional ABS steel tape Snap-off 8 seg-blade heavy duty economy knife Retractable trimming knife c/w 5 blades Beaver style junior hacksaw Professional "plus" cushion grip hacksaw Magnetic pick-up tool Set of 4 Pro-Torq pliers 10" curved jaw grip wrench 12 piece Pro-Torq screwdriver set 64 Piece 1/4` hexagon bit set 1/4` hex bit driver 7 Piece box spanner set 6-19mm c/w tommy bars 10 piece combination spanner set 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm. 50 Piece metric 3/8` square drive socket set 8` Straight blade tinsnip 3 Drawer professional tool chest 5 Drawer professional roller cabinet 8 Piece Metric Pro-Torq hex wrench set on clip 9 Piece imperial Pro-torq hex wrench set on clip kraft boxs 610 X 420 X 150mm 19mm x 33m black PVC insulation tape