Kennedy Service Engineers' Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

102 Piece Service Engineer's Tool Kit

Contents:
Hi-impact mobile tool case.
6 piece 16cm cut 2 needle file set.
150mm chrome finish adjustable wrench.
150mm mains tester range 125/250V.
Insulation tape.
Soldering iron 25W 240V.
Cable stripping knife.
Desoldering gun.
17gm 1.0mm dia 60/40 cored solder.
Square head centre punch 3.2 x 100mm.
150mm/6" flexible rustless rule.
Precision tweezers: 115mm sharp nose, 120mm flat blade.
Eye loupe.
30mm dia. telescopic inspection mirror (handle expands to 480mm).
225g (1/2lb) ball pein hammer.
7.5m/25ft steel tape.
13 segment blade mini autolock retractable knife.
Junior hacksaw frame c/w hardened blade.
10 junior hacksaw blades for metal.
215mm plastic handle scissors.
Magnetic pick up tool.
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision flat nose pliers.
115mm precision long nose pliers.
115mm precision nippers.
115mm precision end cutting nippers.
Pro-torq grip screwdrivers with chrome vanadium blade: Slotted 100 x 6mm.
Crosspoint 76mm x No.0 and No.1, 6mm x No.2.
Supadriv 76mm x No.0 and 1, 100mm x No.2.
Electricians: Parallel 150 and 200 x 5mm.
Offset screwdrivers: 5mm x No.1, 6mm x No. 2.
1000v VDU insulated screwdrivers: parallel 4 x 100mm slotted 5.5 x 125mm.
Torx screwdrivers: T6, T8 and T10. 11 piece screwdriver and tool set: Parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, Crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
7 piece electronic screwdriver set: Parallel 1.4, 2, 2.4 and 3mm, Crosspoint PHO-3, PHO-2 and PH0.
6 piece chrome vanadium steel 0-11 BA open ended spanner set. 20mm diameter sash tool.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

1000V Dual Grip Insulated Screwdriver & Plier Set

Fully insulated professional high grip dual material handles that are VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole in handle. Pliers have chrome vanadium steel double polished head and joint heads and are suitable for production line environments.



Set contents:
Screwdrivers: Crosspoint No.0 x 60mm, No.1 x 80mm, No.2 x 100mm, Parallel tip 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm.
Pliers:
6,3/8" Pro-Torq snipe nose pliers,
6,1/4" Pro-Torq grip nipper pliers,
6,1/2" Pro-Torq engineering combination pliers.

122 Piece "Deluxe" Service Engineers Tool Kit

Contents
Aluminium tool case.
6 piece 16cm needle file set.
150mm adjustable wrench.
Digital multimeter.
125/250V mains tester.
19mm x 33m insulation tape: black, red and green/yellow PVC.
25W soldering iron.
Cable stripping knife.
Desoldering gun.
Desoldering gun.
60/40 cored solder.
Butane soldering torch.
Centre punch 2.4 x 3.2mm.
2 x parallel pin punches.
150mm/6" flexible rustless rule.
Machinists scriber.
Sharp nose tweezers.
Flat blade tweezers.
Eye loupe.
Telescopic inspection mirror.
Magnetic pick up tool (extends to 550mm).
225g (1/2lb) ball pein hammer.
3 1/2oz cross pein hammer.
Scissors.
7.5m/25ft steel tape.
Retractable knife.
Auto return utility knife.
Junior hacksaw & blade.
10 junior hacksaw blades.
150mm flat nose plier.
150mm insulation & wire stripping plier.
150mm wire crimper/stripper.
160mm snipe nose plier.
160mm dagonal cutting nipper.
160mm combination plier.
4 piece circlip plier set.
177mm locking plier.
115mm precision flat nose plier.
115mm precision long nose plier.
115mm precision nippers.
115mm precision end cutting pliers.
165mm soft touch pliers.
Pro-torq grip screwdrivers with chrome vanadium blade: Slotted 100mm x 6mm.
Crosspoint 76mm x No.0 & No.1,6mm x No.2.
Supadriv 76mm x No.0 & 1, 4" x No.2.
Electricians: Parallel 150 & 200 x 5mm
Offset screwdrivers:
5mm x No.1, 6mm x No. 2.
Insulated screwdrivers: parallel 4 x 100mm 1000v VDU, slotted 5.5 x 125mm
Torx screwdrivers: T6, T8 & T10.
Aluminium pocket torch.
11 piece screwdriver & tool set.
7 piece electronic screwdriver set.
6 piece 0 - 11 BA open ended spanner set.
9 piece 5.5 - 13mm combination spanner set.
Multi purpose snips.
7 piece metric hexagon key set.
Multi purpose oil.
20mm sash tool.
100 cable ties.

Kennedy Tool Control Drawer Set

CAD designed and high precision laser cut foam tray inserts are designed to keep tools precisely and accurately in the correct position in the drawer for improved productivity. In some applications a dropped tool is a serious hazard, colour contrasting foam inserts are used to easily recognise lost tooling and also reduce audit time.

TCD025 DL1 Tool Control Drawer Set (25 Pieces)

Professional Pliers: 1x 160mm snipe nose, 1x 160mm diagonal cutters, 1 x 160mm combination.
Pro-Torq Screwdrivers:
Crosspoint: No.2 x stubby, No.2 x 100mm, Pozidriv: No.1 x 75, No.2 x 100, No.3 x 150mm, Flared: 6.3 x 150, 8.0 x 200mm, Parallel: 5.0 x 150mm.
Metric Professional Combination Wrenches: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.

Senator® Home Handyman Tool Kit

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Home Handyman Tool Kit (51 Pieces)

Supplied in a robust toolbox c/w double latch.
Contents:
8 piece fluted handle screwdriver set: Flared 6mm stubby, 3 x 100mm and 8 x 200mm, Parallel 3.2 x 75mm and 4 x 150mm, Pozidriv No.2 stubby, No.1 x 75mm and No.2 x 100mm.
10 piece screwdriver bit set: 6mm quick release hex bit adaptor, Flat 3, 4, 5, 6, and 8mm, Crosspoint No.0, 1, 2, and 3mm.
150mm (6") chrome vanadium adjustable spanner.
225mm (9") hi-vis magnetic boat level.
600mm (24") hi-vis girder section level.
150mm mains tester range 125/250V.
19mm x 33m black PVC insulation tape.
Adjustable telescopic 300mm diameter inspection mirror.
450g (16oz) claw hammer wood shaft.
3M/10ft hi-vis locking tape.
13 seg 9mm standard snap-off blade knife.
Retractable trimming knife c/w 5 blades.
150mm (6") junior hacksaw frame c/w hardened blade.
150mm (6") junior hacksaw blade for metal (10).
300mm (12") DIY hacksaw frame.
177mm (7") plastic handle household scissors.
63mm (2,1/2") half tang filling knife.
76mm (3") half tang scraper.
Magnetic pick-up tool extends to 650mm.
150mm (6") linemans' plier.
125mm (5") snipe nose plier.
125mm (5") diagonal cutting nipper.
255mm (10") straight jaw grip wrench.
Bradawl.
600 piece wall plug set.

Yamoto Starter Mechanics' Toolkit

Contents:
8" and 12" satin chrome adjustable wrench set.
5m/16ft locking tape rule.
Lightweight hacksaw frame.
400cc lever type steel grease gun.
150mm long nose pliers.
200mm long nose pliers.
150mm diagonal nippers.
150mm linesmans' combination pliers.
200mm linesmans' combination pliers.
250mm waterproof pliers.
12 piece mechanics' pattern screwdriver set.
7 piece 6-19mm chrome vanadium open ended spanner set.
14 piece 6-19mm chrome vanadium combination spanner set.
55 piece 3/8" drive socket and bit set.
6 drawer red tool chest.

Starter Mechanic's Toolkit - 100 Pieces

Kennedy AET200 Apprentice Engineers Tool Kit

Supplied in a 3 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

3 Drawer Top Chest:
Top compartment size 89 x 661 x 150mm, drawer sizes 51 x 591 x 282mm (x1), 102 x 591 x 282mm (x2).
3 Drawer Roller Cabinet:
Bottom compartment size 610 x 432 x 356mm, drawer size 591 x 410 x 102mm (x3).

AET200 Apprentice Engineers Tool Kit (208 Pieces)

Contents:
25 piece HSS drill set 1-13.00mm x 0.5mm.
6 piece 200mm double cut engineers' file set.
6 piece 16cm cut 2 assorted needle file set.
25x 230 x 280mm assorted emery sheet.
200mm chrome vanadium steel adjustable spanner.
6 x 150mm flat cold chisel.
19mm x 33m black PVC insulation tape.
76mm 18 blade combination feeler gauge set.
4.8mm square head centre punch.
150mm/6" stainless steel rule c/w pocket clip.
178mm double ended engineers' scriber.
Eye loupe.
Adjustable telscopic 30mm dia inspection mirror (expands to 180mm).
6 piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
150mm (6") engineers' square - BS939 grade B.
Tap wrenches 1.5-6.4mm and 6.4-19mm.
Magnetic telescopic pick-up tool extends to 550mm.
29 piece engineers' bit set: all 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm. Flat: 3, 4, 5, 5.5, 6.5 and 8mm, 3/32", 1/8", 5/32", 3/16", 1/4", 7/32" and 5/16". Crosspoint: No.1, 2 and 3. Pozidriv: No.1, 2 and 3.
450g(1lb) ball pein hammer wood shaft.
7.5m/25ft steel tape.
Snap-off 8 segment blade economy knife.
Retractable trimming knife with 5 blades.
Junior hacksaw frame.
300mm lightweight professional hacksaw frame.
6 off 12" x 1/2" x 18t HSS hacksaw blades.
20 junior hacksaw blades.
2 plastic handle household scissors.
150mm snipe nose plier with side cutter.
150mm diagonal cutting nipper.
150mm engineers' combination pliers with side cutter.
250mm curved jaw high strength grip wrench.
8 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75, No.2 x 100, Pozidriv No.2 x 100, Flared 6.3 stubby, 6.3 x 100, 8.0 x 200, Parallel 5.0 x 75, 5.0 x 150.
14 piece combination spanner set 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
25 piece metric socket set 1/2" square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
9 piece metric hex key set 1.5-10mm.

22 Piece Plumbers Kit

22 Piece Plumbers Kit supplied in a robust toolbox c/w double latch.Contents: 255mm (10") stillson wrench. 3 - 22mm capacity tubing cutter. 3 - 41mm tube deburrer. 9.5 - 32mm basin wrench. 300mm girder section spirit level. Telescopic inspection mirror. Junior hacksaw frame c/w hardened blade. Pad saw. 255mm groove slip joint waterpump plier. 6 piece flat wood bit set 9.5 - 25mm230mm . 12mm x 12M ptfe thread sealing tape to bs6920. 100gm fluxite paste. Powerflow lead free solder 3.25mm 250g. 3 row plastic handle wire scratch brush. 450 gm (1lb) grade 2 wire wool. Blow lamp & 2175 gas cartridge.