Dewalt Cordless Drills

Multi position side handle. Multi-voltage charger.
2 slide batteries. Heavy duty kit box.
Featuring NEW XR 4.0Ah Li-Ion battery technology.
Tough 3 speed all metal transmission for increased run time and longer tool life.
22 position adjustable torque control for optimised precision when screwdriving.
13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes.
Efficient intelligent trigger allowing total control over all applications.
Bright white LED with delay feature for improved visibility and flashlight functionality. Improved grip design providing greater application control and maximum comfort.
Steel belt clip and tough magnetic bit holder ensure strong storage solutions.



DCD980M2 18V (4.0Ah) Li-Ion Drill driver

Dewalt DCD980M2 18V (4.0Ah) Li-Ion Drill driver specification:
Voltage: 18V.
Chuck capacity: 1.5 - 13mm.
Power output: 500W.
No load speed: 0 - 575/0 - 1350/0 - 2,000rpm.
Maximum torque: 80Nm.
Drilling capacities:
Steel 13mm
Wood 50mm.
Weight: 2.4kg.

Supplied with:
Batteries: 2x 4.0Ah.
Multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion slide pack batteries.

36v LXT SDS Combi Hammer Drill

These 36V cordless combination hammers feature compatability with both Makita 36V - 2.6Ah Li-Ion battery BL3626 and
36V - 2.2Ah Li-Ion battery BL3622A. Electric brake, variable speed control and trigger torque limiter. 40 different bit-angle settings. Vibration absorbing handle. LED job light with preglow and afterglow functions. Three mode operation - rotation + hammering, rotation only and hammering only.

Specifications:
Battery type: lithium-ion.
Battery: 2.6 Ah.
Charging time: 22 min.
Voltage: 36V.
Operation modes: RO/RH/HO.
Maximum drilling capacities:
masonry 26mm, steel 13mm, wood 32mm.
Impacts per minute: 0 - 4800ipm.
No load speed: 0 - 1200rpm.

BHR262Z 36V LXT Rotary Hammer Drill Body Only

36V Cordless Combi Drill/Driver

With the Bosch high performance motor, the two-stage planetary gears and the new 36V lithium-ion battery, the tool offers levels of torque that could hardly be any more extreme and this in any speed range.
Supplied with charger, two batteries, 1.5 - 13mm keyless quick change chuck and heavy duty carrying case.

GSB36V - 36V Li-ion

With the Bosch high performance motor, the two-stage planetary gears and the new 36V lithium-ion battery, offers levels of torque that could hardly be any more extreme ? and this in any speed range. No load speed: 0 - 450/1500rpm. Max. impact rate: 18,000. Torque, hard/soft: 80/34Nm. Max. drilling capacities: wood 50mm, steel 16mm, masonry 16mm. Max. screw diameter: 12mm. Battery capacity: 2Ah. Charge time: 45 minutes.

Makita Cordless Drills

The Makita 8391DWPETK 18V (1.3Ah) 13mm Combi Drill is a compact & lightweight variable speed cordless drill ideal for general fixing applications and masonry drilling. It is supplied with a 101 piece accessory set.

8391DWPETK 18V (1.3Ah) 13mm Combi Drill and 101 Piece Accessory Kit

8391DWPETK Specification:
No load speed: 0-1300/0-400rpm
Blows per minute: 0-19,500/0-6000bpm
Drilling capacity:13mm Masonry, 13mm Steel, 36mm Wood.
Torque Settings: 16
Max Torque: 38Nm
Vibration K factor 1.5 m/sec
Noise sound pressure 78 dB(A)
Weight 2.3 kg


Supplied complete with: 2x 18V (1.3Ah) Ni-Cad Batteries, 60 minute charger
Carrying case and 101 accessory set

Contents of Accessory Set:
13x Nutdrivers.
4x Drill Stop
1x Hex key
2x Screw Holders
1x Center Punch
1x Counter Sink
6x Brad Point Drills
6x HSS Drils
6x Masonary Drills
3x Flat Bits
5x Hole Saws
1x Bit Driver Handle
1x 200mm (8") Aluminium Spirit Level
30x 25mm Screwdriver Bits
20x 50mm Screwdriver Bits
1x 60mm Magnetic Bit Holder

NiMH Batteries - O-Type

2607335692 12.0V 3.0Ah GML24V/VCD, AL2422DC, AL2425DC, AL2450DV. AL2498FC

Cut off Saw

Easier to use than a hacksaw and far more portable than a chop saw, easily cuts steel, aluminum, wood and plastic, using just one blade. When cutting steel the machine cuts producing no burr and very few sparks, leaving the material instantly workable. Cuts through rebar, bolt trimming and other small awkward applications, plus cuts through wood with nails and screws.

Specifications
Motor: 1250W.
Maximum box section (1/8" wall 90): 1-3/4" x 1-3/4".
Maximum box section (1/8" wall 45): 1-3/4" x 1-3/4".
Max. rectangle (1/8" wall 90): 1-3/4" x 3-4/5".
Max. rectangle (1/8" wall 45): 1-3/4" x 1-3/4".
Max. round (1/8" wall 90): 1-3/4 Dia.
Max. round (1/8" wall 45): 1-3/4 Dia.
No load speed: 3500min-1.
Machine weight: 8.65kg.

RAGE 4

Bosch® 5" Angle Grinders

GWS 12-125CI
The compact tool with KickBack Stop - detects when the tool is jammed and shuts it down immediately. Distortion-resistant protective guard. Vibration control auxiliary handle with 70% vibration reduction for non-fatigue working (EN 50144). Direct cooling for high overload capability and long service life. Constant Electronic for constant speed, also under heavy load. Overload protection, smooth start and starting current limitation. Good handling thanks to slim housing. Gear head can be rotated in 90° steps. Handle can be used on right or left.

Specifications:
Power input: 1100W.
No load speed: 11000rpm.
Power output: 660W.
Spindle thread: M14.
Disc diameter: 125mm.
Rubber sanding plate diameter: 125mm.
Wire cup brush diameter: 70mm.
Weight: 1.60kg.
Comes with: protective guard, vibration control auxiliary handle, back flange, locking nut, two pin spanner, quick-locking nut and carrying case.

Disc supplied separately.

Combi Trimmer

Effortless trimming and edging. Supplied with standard line and extra strong line cassettes. Rotating head for easy trimming or edging. 35cm height adjustable telescopic handle. Pro-tap auto feed as standard. Fully adjustable comfort handle. Handy stowage hook for power cable.

ART 30 Combitrim

Bosch 2Kg SDS Plus Hammer Drill - GBH 220D

2kg 3-function hammer fits perfectly in to any tradesman's tool kit. With its powerful 650-watt motor, fast drilling rate and a 30 percent higher chiselling performance than others in the entry-level class. Lightweight and compact, ideal for working overhead. Overload clutch to protect the user and the machine. Forward /reverse rotation for dislodging jammed drill bits. Continuously variable speed control for clean drilling starts.
Rotary hammer with SDS-plus.
Impact stop for drilling in wood and steel.
Rotary stop for chiselling out conduit channels etc.
Supplied with auxiliary handle, depth stop, carrying case

Input Wattage: 650W
No load speed: 0 - 1300rpm
Drilling Capacity: Wood 30mm; Concrete 20mm; Steel 13mm; Diamond core 68mm
Impact rate at rated speed: 0 - 4980bpm
Impact Energy: 1.7 Joules
Vibration level: 14 - 12 m/s

DeWALT Hammer Drills

The DeWALT D25123K SDS plus hammer drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter and with impact-stop in can be used for drilling in wood, steel, ceramic and screw driving applications.

Features include:
Rotation-stop for light chiselling applications in brick, soft masonry and occasionally concrete.
Large 22 mm hammer mechanism delivers high performance with low stress to the critical components resulting in better durability.
Electronic variable speed for total control in any application.
Safety clutch eliminates sudden high-torque reaction should the bit jam.
Ergonomic rubber coated back handle design for improved comfort in use.
Rounded ergonomic industrial design allows easy and comfortable handling in any application.
Improved sealing for maximum protection from dust ingress ensuring long tool life.

Supplied complete with:
Multi position side handle.
Depth stop.
Heavy duty carrying case.

Available as:
110v Order Code: DEW-272-2518K.
230v Order Code: DEW-272-2518R.

D25123K SDS Plus Hammer Drill

D25123K SDS Plus Hammer Drill Specification:
Power Input: 800W.
Power Output: 395W.
No Load Speed: 0-1150rpm.
Blows per Minute: 0-4300bpm.
Impact energy (EPTA 05/2009): 2.8J.
Tool Holder: SDS-Plus.
Drilling Capacity:
Wood: 30mm.
Metal: 13mm.
Concrete: 26mm.
Core bit: 65mm.
Weight: 2.9kg.
Length: 352mm.
Height: 200mm.

Hand/Arm Vibration: 17.8m/s2.
Uncertainty K 1 (Vibration): 1.5m/s².
Hand/Arm Vibration – Chisel: 9.8m/s².
Uncertainty K 2 (Vibration): 1.5m/s².
Hand/Arm Vibration – Metal: 2.6m/s².
Uncertainty K 3 (Vibration): 1.5m/s².
Sound Pressure: 89 dB(A).
Uncertainty K 1 (Sound): 3.8dB(A).
Accoustic Pressure: 100.1dB(A).
Uncertainty K 2 (Sound): 3.8dB(A).