Makita Metal Nibbler

Zips through sheet metal, plastics and other sheet materials. Built-in thickness gauge for convenience with easy punch and die replacement for reduced down time.
Input wattage: 660w
Strokes per minute: 1,300spm
Max. Cut in Mild Steel: 3.2mm
Max. Cut in Stainless Steel: 2.5mm
Min. Cutting Outside Edge: 128mm
Radius Inside Edge: 120mm
Weight: 3.50kg
Supplied with:
3mm hex wrench, punch & die set, spacers x 2.

JN3200

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

18V Cordless Impact Wrench

Same fastening torque in forward and reverse rotations with full torque at 6 seconds after seating. Compact design provides more control and maneuverability. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are joined with vibration absorbing cushion rubbers. The large bumper protects workpiece from scratches,increasing maneuverability. Ergonomically designed handle with rubberized soft grip provides more control and comfort. Easy-to-operate LED light for illuminated operation can be turned on or off with an independent switch, and features an over-discharge-protective circuit. Also features a hanging hook.

Capacity: Standard bolt:M12 - M22; High tensile bolt: M12 - M16
Impacts per minute: 2,200
No load speed: 1,600rpm
Maximum torque 440Nm
Dimensions (L x W x H) 266mm x 82mm x 290mm
Net weight: 3.4kg

Naked tool only - Batteries and Charger not supplied.

13mm Rotary Drill

Electronic, variable speed with forward and reverse action. Drill spindle with hexagon socket for direct insertion of screwdriver bits. Small width across corners of 29mm. Fully ball and roller bearing-mounted.

Power output: 287W.
Power input: 500W.
Rated torque: 11,5 /- 6,0 Nm.
Chuck: 13mm Keyless.
No load speed: (1st gear) 0-550 rpm / (2nd gear) 0-1.000rpm.
Drilling range: (1st gear) Aluminium 20mm / Wood 32mm / Steel 13mm.
Drilling range: (2nd gear) Aluminium 12mm / Wood 20mm / Steel 8mm.

GBM 13-2RE

Hitachi Nibblers

CN16SA
Lightweight design with slimline grip. Fast cutting speed of 1.8m/min (mild steel plate). Downward cutting action permits cutting of trapezoidal metal plate and minimises scattering of chips on workpiece. Three position indexing die holder allows quick and easy change of cutting direction.

Specifications:
Cutting capacity: mild steel 1.6mm, S/steel: 1.2mm, aluminium plate: 2.3mm.
Power input: 400W.
No load speed 2300/min.
Min cutting radius: 40mm.
Length: 250mm.
Weight: 1.7kg.
Standard Accessories: die, punch and 2 wrenches.

Available in 240V and 110V.

Makita 125mm (5") Angle Grinder

Increased power at 710W. Labyrinth construction protects all ball bearings from dust and debris. Small circumference barrel grip for easy handling. Shaft lock for easy wheel changes. Easier repairing of gear section, assembled with key. High heat resistance. No Load Speed: 10,000rpm. Wheel size: 125mm. Bore Size: 22mm. Spindle size: M14x2mm. Input wattage: 710W. Net Weight: 1.4kg. Accessories: Lock nut, wrench, flange and wheel guard, side handle.

9555NB

Heat Gun Accessories

For spreading hot air over large areas.

Surface Nozzle

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

DeWalt® 305mm Compound Sliding Mitre Saws

DWS780-LX
Offers outstanding cutting performance in both small profiles and large construction timbers. XPS shadow line cut indicator which provides a fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required. Heavy-duty durability with the ability to fully adjust the machine to maintain accuracy over the life of the tool. Quick release bevel stop setting provides accurate and simple setting of bevel angles up to 49° left and right. Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly angle between 0°-50° left and 0°-60° right.

Specifications:-
Power input: 1675w.
Power output: 960w.
Blade speed: 1900-3800rpm.
Blade diameter: 305mm.
Blade bore: 30mm.
Bevel capacity: 49/49°.
Mitre capacity: (right/left) 60/50°.
Cutting capacity: @ 90°/90° (W)303mm x (H)110mm.
Includes: 60 tooth blade, blade spanner, dust Bag and material clamp.

Available in 110V and 240V.

Kobe Multi-Purpose Tool and Accessory Kit

The Kobe MPT130EK Multi Purpose Tool Kit is ergonomically designed and offers the user a comfortable grip with a convenient lightweight housing. It is the ideal tool for users that like to perform detailed tasks, whether it?s occasionally or regularly. Using the high quality Kobe accessories and attachments, you will discover numerous possibilities: detailed sanding, precise routing, polishing for a great finish or even cutting through all kinds of materials, there is no limit to the possible applications you can use the Kobe MPT130EK for.

Key Features:
Comfort switches, more comfortable when handling and provides better control
Variable speed 8,000 to 33,000rpm, to match speed precisely to the application.

MPT130EK Multi Purpose Tool Kit

Kobe MPT130EK Multi Purpose Tool Kit
Specification
Power input: 130W.
No load speed: 8,000 - 30,000rpm.
Noise: 82db(A).
Weight: 640g.

Accessories: flexible rubber drive shaft for use where maximum flexibility is required to improve access in confined spaces. Bench clamp and tool steady. Fix the tool steady to a work bench or table to hold the multi-tool in place when using the flexible drive shaft. 118 piece accessory kit includes: various collets, cutters, drills, abrasives, brushes, burrs, wheels, discs and mandrels.

Supplied in a fitted aluminium case.

Complies to EN 50144-1 and EN 68 1977.