Makita Battery Chargers for Cordless Tools

Li-Ion/Makstar Chargers. These chargers use a built-in memory chip in the battery and a chip in the charger to decide on the best charging method. Optimal charging is achieved by controlling current, voltage and thermal. Additional chargers used in conjunction with extra batteries also increase productivity, charging batteries while not in use. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing.

DC24SC Battery Charger

Li-Ion/NiMH quick charger. 7.2 to 24V. 30 minute charge (3.0Ah battery).

Kobe Drill Sets

This two piece drill set from Kobe contains:

A tungsten carbide tipped tile and glass drill bit for drilling through glass, tiles, mirrors and ceramics. Suitable for use with most hand held power drills, operates in rotary mode only with hammer action switched off. Use water to cool the drill tip.

A tungsten carbide tipped masonry drill bit for prolonged life and heavy-duty use, with a flute design for fast and effective waste removal.

Tile and Masonry Drill Bit Set

Available in a range of diameters:
5.00mm Order Code: KBE-280-7500K.
6.00mm Order Code: KBE-280-7510K.
6.50mm Order Code: KBE-280-7520K.
7.00mm Order Code: KBE-280-7530K.
8.00mm Order Code: KBE-280-7540K.

DV18DSDL/JB 18V Combi Drill With 2x2.0AH LI-ION Batteries

Combi drill with multiplex protection circuit for maximum battery life. Lightweight slide-in Li-Ion batteries. 2-speed gearbox to suit most applications.

Specifications:
No load speed: 0 - 400/0 - 1,800rpm.
Max torque: 43Nm.
Blows per minute: 0 - 5,600/0 - 21,000bpm.
Max. drilling capacities: steel 13mm, wood 32mm, masonry 13mm.
Battery: 2x 18V - 2.0Ah.
Weight: 1.7kg.

SDS Plus Rotary Hammer Drill

Blows per minute: 4050bpm
No load speed: 1050rpm
Drilling capacities: concrete 22mm steel 13mm wood 32mm
Joules: 2.3Js
Weight: 2.5kg

Available in 240V and 110V, in models with chuck or keyless chucks.

Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging, therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines and circuit board manufacturing.

Kobe Power Tool Batteries (Ni-Cd)

Spare Battery to suit Kobe 12V cordless torque adjustable drill (ASBVET-2)

18V LXT Drill Driver Body ONLY

BDF453Z

Bosch Die Grinders

GGS28 short design, also suitable for left-handers.
Little servicing required due to significantly
improved carbon brush lifetime.

GGS28 Straight Die Grinder

Max. disc dia.: 50mm
No load speed: 28,000rpm.
Collet size: 8mm.

Hitachi Angle Grinders

Powerful 840W motor
High overload durability
Compact design
Side mounted switch
Two position side handle

G12SN 115mm (4 1/2”) Angle Grinder

G12SN Angle Grinder specification:
Disc Diameter: 115mm (4-1/2").
Bore Diameter: 22.23mm (7/8").
No-Load Speed: 10,000/min.
Overall Length: 259mm.
Power Input: 840W.
Weight: 1.6kg.

Supplied with:
Side Handle, Depressed Centre Wheel, pin spanner.

Bosch® 36v Cordless SDS Hammer Drill + 2 2.6Ah Li-Ion Batteries

GBH 36VLI
Pneumatic hammer mechanism with chisel function. As fast as the best 2kg mains-powered hammer due to high impact energy (2.8 joules). Unique Bosch Premium lithium-ion technology for 400% longer lifetime and runtime. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and deep discharge.

Specifications:
Power input: 600W.
Max. impact: 2.8J.
Impact rate: 0-4260bpm.
Rated speed: 0-960rpm.
Battery: 36V.
Weight: 4.3kg.
(L)367 x (W))107 x (H)221mm.
Toolholder: SDS-plus.
Max. drilling dia: steel 13mm, in wood 30mm, masonry: 26mm.
Comes with:
Quick charger, 2 x 2.6 Ah Li-Ion batteries, Auxiliary handle, depth stop 210mm, carrying case.

Makita Rotary Hammer drills

Makita HR2300 series models are 23mm (7/8") Hammer drills with a chuck adapted for SDS-PLUS shank bits. Features compact and lightweight tool design, ergonomic handle and many other features designed for more comfort and better control.

HR2300 23mm Rotary Hammer Drill SDS+

HR2300 Hammer Drill Specifications:
No Load Speed: 0-1200rpm.
Blows per minute: 0 - 4600ipm
Impact energy per stroke: 2.6Js
Vibration: Hammer Drilling: 15m/sec².
Input Wattage: 720w
Drilling capacity (Max):
Wood: 32mm.
Steel: 13mm.
Concrete (TCT bit): 23mm.
Concrete (TCT core): 68mm.
Concrete (Diamond core): 65mm.
Net weight: 2.7kg


Features include:
Double Insulation.
Variable speed.
With reversing function.
Torque limiter: The drill stops when the bit hits against reinforcements.
Improved dust collection.

110V Order code: MAK-275-6382A
240V Order code: MAK-275-6382B