Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Type 3 Flat Head Silencer Sintered

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Reducer Stem

Quick Fit Pneumatic Fittings

Suitable for vacuum application. Rapid type push on fittings with retaining nut.

Threaded Adaptors

2020 Series

Camozzi Male/Female Elbow Connectors - Taper

2020
Series 2000 pipe fittings BSPT adaptor male/female elbow.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Rexroth Y-Plug Connectors

Y-plug connector with a push-in fitting.
Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Materials:
Housing: polybutyleneterephthalate.
Seal: acrylonitrile butadiene rubber.
Tooth lock washer: stainless steel.
Release ring: polyoxymethylene.
Release ring holder: die cast zinc; brass, nickel-plated.

QR1 Series

PCL XF Series Airline Adaptors (EURO 130)

For use with XF Series Couplings. Designed to conform to ISO 4414:1998 and EN 983:1996 safety requirements covering the installation and use of pneumatic equipment.

Male Threaded

1/4" BSPT.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Flanged Tank Connectors

For use on water tanks and cisterns.

SMC Universal Male Elbows

KQ2V
Universal male elbows.

KQ2V04-01S: Tube O.D. 4mm. Thread: R1/8.
KQ2V06-01S: Tube O.D. 6mm. Thread: R1/8.
KQ2V06-02S: Tube O.D. 6mm. Thread: R1/4.
KQ2V08-01S: Tube O.D. 8mm. Thread: R1/8.
KQ2V08-01S: Tube O.D. 8mm. Thread: R1/8.
KQ2V08-02S: Tube O.D. 8mm. Thread: R1/4.
KQ2V10-02S: Tube O.D. 10mm. Thread: R1/4.
KQ2V08-03S: Tube O.D. 10mm. Thread: R3/8.
KQ2V08-04S: Tube O.D. 12mm. Thread: R1/4.



Colour: white.

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RVT Series Elbow Pneumatic Fitting

Standard Metric M5-G Elbow push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.