SMC AN203-02 Series Silencer

Over 25dB(A) noise reduction.
Space saving
Compact style.

AN203-02 Specification:
Port size: 1/4.
Effective area (mm2): 15.
Fluid: Compressed Air.
Max. operating pressure: 1.0MPa.
Noise reduction: 25dB(A).
Ambient and fluid temperature: 5 to 60C.
Weight: 3g.

Elbow Type

Three functions from a single component to minimises installation time and cost. Accepts nylon and polyurethane tubing. Integral one-touch fitting. 4mm - 12mm.

Camozzi Male Stud Tees

2080
Series 2000 pipe fittings BSPT adaptor male stud tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

PCL? PF Airline Adaptor

This PF range of couplings and adaptors has been designed to offer a competitive alternative to the genuine Schrader range of couplings and adaptors.
Nominal bore: 5.0mm.
Flow rate 6bar: 2200 l/min 0.5bar p.d.
Maximum working pressure: 35 bar (508lbf/in).
Temperature range: -40C to 100C.



1/4" BSPT.

PCL ?Standard? Airline Couplings

The 'Industry Standard' coupling. For use with air tools, garage, industrial air line supplies and test panels. Free air flow rate at 7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated all steel construction, finished in hard wearing passivate. Stainless steel springs and balls. Positive single locking action prevents accidental dislocation. For fixed applications - for couplings for trailing hoses see 'Vertex' type below.

Male Threaded

1/2" BSPT.

SMC One-Touch Mini Hex Socket Head Male Adaptor

KJS
Mini hexagon socket head male connector.
KJS04-M3: Tube O.D. 4mm. Thread T: M3 x 0.5.
KJS04-M5: Tube O.D. 4mm. Thread T: M5 x 0.8.
KJS06-M5: Tube O.D. 6mm. Thread T: M5 x 0.8.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Taper

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1 Series Blanking Screw Pneumatic Fitting

Blanking screw with O-ring M7-G1/2 FPT-S-RBI pneumatic fitting.
Working pressure 0 bar/16 bar at -20C/ +80C.
Materials:
Screw: Brass
Housing: Brass, nickel plated
Seal: Acrylonitrile Butadiene Rubber
Thread: Brass, nickel plated

For further specification on this product please see the attached PDF under the additional information tab.

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.