SMC Pneumatic Fittings

For pneumatic controls. Two input signals, one output signal.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Branch Tee to Male Taper

Pneumatic First Aid Kit

Designed to reduce downtime, contains:
Tube to tube connectors: 6580 (4, 6, 8 & 10mm) (x2)
Tube to tube elbows: 6550 (4, 6, 8 & 10mm) (x1)
Tube tees: 6540 (4, 6, 8 & 10mm) (x1)
Stem adaptors: 6811 (4, 6, 8 & 10mm - 1/8, 1/4, 3/8 threads) (x1)
Straight connectors: S6510 (4, 6, 8 & 10mm - 1/8, 1/4, 3/8, 1/2 threads) (x2)
Banjo rings: 6610 (4, 6, 8, 10mm - 1/8, 1/4, 3/8 threads) (x1)
Banjo bolts: 1631 (single 1/8, 1/4, 3/8 threads) (x1)
Reducers: 6800 (5-6, 4-6, 6-8, 8-10mm) (x2)
BSP reducers: 2530 (1/2-3/8, 1/2-1/4, 1/4-1/8, 3/8-1/4) (x1)
BSP adaptors female elbow: 2013 (1/8, 1/4, 3/8 threads)
(x1)
BSP adaptors female tee: 2003 (1/8, 1/4 threads) (x1)
BSP adaptors m/f elbow: S2020 (1/8, 1/4, 3/8 threads) (x1)
BSP adaptors barrel nipple: S2500 (1/8, 1/4, 3/8 threads) (x1)
Blanking plugs: 6900 (4, 6, 8, 10mm tube) (x2)

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1560 Male Stud Swivel

Camozzi Female Equal Cross Couplings

2033
Series 2000 pipe fittings BSP adaptor female equal cross.
Available in threads G1/8, 1/4 and 3/8.

PCL XF Series Airline Adaptors (EURO 130)

For use with XF Series Couplings. Designed to conform to ISO 4414:1998 and EN 983:1996 safety requirements covering the installation and use of pneumatic equipment.

Integral Tailpiece (non-threaded)

1/4?? Bore.

Quick Fit Pneumatic Fittings

Suitable for vacuum application. Rapid type push on fittings with retaining nut.

Threaded Adaptors

2095 Series

Camozzi Swivel Y-Connectors

7562
Super-rapid compact fitting Technopolymer fitting swivel Y-connector.
Available in:
4mm, G1/8 thread.
6mm, G1/8 thread.
6mm, G1/4 thread.
8mm, G1/8 thread.
8mm, G1/4 thread.
10mm, G1/4 thread.
10mm, G3/8 thread.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Parallel