SMC One-Touch Plug-In Elbow Connectors

KQ2L
Plug-in elbow. Colour: white.
KQ2L04-99: Tube O.D. 4mm x fit dia 4mm.
KQ2L06-99: Tube O.D. 6mm x fit dia 6mm.
KQ2L08-99: Tube O.D. 8mm x fit dia 8mm.
KQ2L10-99: Tube O.D. 10mm x fit dia 10mm.
KQ2L12-99: Tube O.D. 12mm x fit dia 12mm.

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Camozzi Multi Swivel Tee

7542
Super-rapid compact fitting Technopolymer multi Tee with O-ring assembled.
Available in:
6mm, 3x4mm tube, G1/8 thread.
6mm, 3x4mm tube, G1/4 thread.
8mm, 3x6mm tube, G1/8 thread.
8mm, 3x6mm tube, G1/4 thread.
10mm, 3x8mm tube, G1/4 thread.
10mm, 3x8mm tube, G3/8 thread.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Equal Tees

Connects plain pipe end to end and at 90.

SMC One-Touch Fitting Female Connectors

KQF
To pipe from the male threaded portion of a pressure gauge, etc.
KQF04-01: Tube O.D. 4mm. Thread: RC1/8.
KQF06-01: Tube O.D. 6mm. Thread: RC1/8.

Rexroth Bulkhead Plug Connector

QR1-RSC Series
Push-in fitting plastic bulkhead plug connector.
Available in diameters: 6, 8, 10 and 12mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass nickel-plated.

SMC Pneumatic Fittings

Finger valve series VHK has a large effective area of 2.0 to 17.5mm. This series begins with a minimum tube O.D of 4. The valve direction clearly indicates whether the valve is open or closed (shut to open is counter- clockwise). Classification of knob by color difference facilitates distinction between 2 port valves (gray) and 3 port valves (blue).

VHK Series Finger Valve

Rexroth Standard Blanking Plugs

QR1-RDS Series
Pin bushing blanking plug.
Available in diameters: 4, 6, 8, 10, 12 and 14mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Housing material: Polybutyleneterephthalate.

Rexroth T-Unions

QR1-RTT Series
2x push-in fitting T-union with external thread.
Available in threads:
G1/8 x 6mm diameter.
G1/8 x 8mm diameter.
G1/4 x 6mm diameter.
G1/4 x 8mm diameter.
G1/4 x 10mm diameter.
G1/4 x 12mm diameter.
G3/8 x 10mm diameter.
G3/8 x 12mm diameter.
G3/8 x 14mm diameter.
G1/2 x 12mm diameter.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10bar
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.
Thread: Brass, nickel-plated.

SMC Different Diameter Union Y-Connectors

KQ2U
Different diameters union Y-connectors.

KQ2U04-06: Tube O.D. 2x4mm x 6mm.
KQ2U06-08: Tube O.D. 2x6mm x8mm.



Colour: white.