Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RPN Series Straight Pneumatic Fitting

Standard metric M5-G 1/2 straight push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Elbow Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RVT Series Elbow Pneumatic Fitting

Standard Metric M5-G Elbow push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

SMC One-Touch Fitting Bulkhead Connectors/Bulkhead Union

KQ2E
One-touch fitting bulkhead connector/bulkhead union.

KQ2E04-00: Tube dia: 4mm. Port size: 4mm.
KQ2E06-00: Tube dia: 6mm. Port size: 6mm.
KQ2E08-00: Tube dia: 8mm. Port size: 8mm.
KQ2E10-00: Tube dia: 10mm. Port size: 10mm.
KQ2E12-00: Tube dia: 12mm. Port size: 12mm.
KQ2E16-00: Tube dia: 16mm. Port size: 16mm.

PCL Airline Coupling Adaptors

Case hardened with passivated finish. For use with 'Standard' and 'Vertex' type couplings. Hard wearing passivated zinc finish for double protection against corrosion.

Female Threaded

1/4" BSPT.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Taper

Camozzi Female/Female Reducers

2553
Series 2000 pipe fittings BSP adaptor female reducer.
Available in threads:
G1/8 - G1/4 overall length 17mm.
G1/8 - G3/8 overall length 18mm.
G1/4 - G3/8 overall length 19.5mm.
G1/4 - G1/2 overall length 23mm.
G3/8 - G1/2 overall length 24mm.

Quick Fit Pneumatic Fittings

Suitable for vacuum application. Rapid type push on fittings with retaining nut.

Threaded Adaptors

3030 Series

SMC One-Touch Mini Male Adaptor

KJH
Use to pipe in the same direction from female thread. Most general style.
KJH04-M3: Tube O.D. 4mm. Thread T: M3 x 0.5.
KJH04-M5: Tube O.D. 4mm. Thread T: M5 x 0.8.
KJH06-01S: Tube O.D. 6mm. Thread T: R1/8.
KJH06-M5: Tube O.D. 6mm. Thread T: M5 x 0.8.

PCL Genuine "Schrader" Airline Couplings

High flow, quick release couplings with locking facility to prevent accidental disconnection. Swivel facility eliminates hose kinking. Free air flow rate at 7 bar/100PSI: 50CFM (1400ltr/min).

Male Threaded