产品 / 轴承 & 滚轴
编号：SNR6817220J
●产品描述：
SNR Shaft Seals & Adaptors
The SNR SC...SV series consists of a contact washer made of corrosion-protected steel with a vulcanised rubber lip to locate in the housing.
The V-Ring seal has axial contact after being fitted to the shaft with the face of the washer. If the shaft extends through the housing one seal pack must be
ordered for both side of the housing.
Other sealing arrangements are available through your local service branch.
Pillow Block V-Ring Seals
编号：CTT6887919W
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 22/C (SPC/22)
编号：QFT6710820F
●产品描述：
Grade G100 Steel Balls
Low carbon case hardened steel balls are for general use in castors, conveyors, non precision bearings and any slow rotating parts.They have resistance to shock loads with a good load carrying ability and excellent resistance to surface wear. The G100 standard ball is of a high spherical standard.
Inch
编号：CTT6887687V
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 13/A (SPA/13)
编号：SNR6738522S
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Flanged Housing Unit - MFC Type Round - Four Bolt
Made of grey cast iron with four fixing holes.
编号：SNR6835439T
●产品描述：
Spherical Roller Bearings - C3 Tolerance
Premier range - material improvements give:
• Increased capacity.
• Extended service life.
• Reduced friction torque.
• Will tolerate temperatures up to 200°C.
• Steel and brass cages.
• Available from UK stock.
Taper Bore
编号：OPB6881177J
●产品描述：
VB Classical V-Belt
V-Belts to BS3790, DIN2215 and ISO 4184.
Belt Section 13A (SPA/13)
编号：SNR6738545Q
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Plummer Blocks - Standard Series - MP Type
Cast iron self lube unit plummer blocks. Standard series. With two slotted holes or fixing.
编号：CTT6881355K
●产品描述：
Conti-V Standard Multiflex V-Belts
Classical section wrapped V-belts to DIN 2215. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 813. Insensitive to dust. Suitable for tropical climates.
Belt Section 17/B (SPB/17)
Max Width (b1) 17mm, Height (h)11mm.
编号：NTN6718140G
●产品描述：
Thrust Ball Bearings
Thrust Bearings are designed primarily to support axial loads at contact angles between 30° and 90°. Just as with radial bearings, these bearings differ according to the type of rolling element they use. With thrust bearings, it is necessary to supply an axial preload in order to prevent slipping movement between the bearing's rolling element and raceways.
Comprising of caged ball bearing element and pair of shaft housing washers (bearing shaft washer and housing washer, and the normal contact angle is 90°. Axial loads can be supported in only one direction, radial loads cannot be accommodated. Spherical roller and needle roller versions are also available.