Conti-V Ultraflex

Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 17/B (SPB/17)

Table Top Slat Chain

A complete range of table top chains and sprockets in steel, stainless steel and molded thermoplastics. These are manufactured specifically for a conveying applications.
Some table top chains have been standardised between manufacturers. We show below the most popular ranges but with many specialty attachments and options available on table top chain, please contact your local service centre to assist in identifying and recommending the right table top chain for your application.

981M Series - Side Flexing Chain, Magnetic

Reduced Flight Gap
Material: Superior grade
of cold rolled special
ferritic stainless steel
Length: 10?.

Cast Iron Motors - 4P

Cast Iron Frame Motors - IE2 (Eff1 Premium Efficiency). Suitable for inverter duty applications. Regreasing nipple from frame 225S/M and above. Thermistors (1 per phase) fitted in
frame 160M and above.

Cast Iron - B5 - Flange Mounted - 4 Pole - 1,500rpm - AC 3 Phase

Cylindrical Roller Bearings

Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.

Non-Locating Type with two Ribs on Inner Ring and Outer Ring is without Ribs

SK High Power Wedge Belts

SK wedge belts offer significant performance advantages with up to 97% drive efficiency with extended belt life and easier fitting.
S=C Plus length tolerance* Belts are automatically length matched to very tight tolerances and so require no matching, are easier to fit and run more efficiently in sets.
Example: SPC 5000 tolerance range = +/-2mm compared to DIN standard/other manufacturers = +/-50mm
Advanced manufacturing techniques like our rotational curing process mean that our SK belts are less prone to fatigue and absorb less power in wrapping around the pulley, resulting in improved drive efficiency and longer belt life.
*applies to belts over 1160mm length. Consult catalogue for details.
Dimensions: 487 to 12500mm.
Standard range further sizes on request.

Belt Section 10/Z (SPZ/10)

Conti Synchrobelt Timing Belts

? Moderately oil-resistant
? Temperature range -20C up to +100C
(depending on application)
? Non-aging and ozone-resistant
? Suitable for tropical climates
Size designation (example)
150XL037
150 150? (381.0mm) pitch length
XL 0.2? (5.08mm) tooth pitch
037 3/8? (9.25mm) timing belt width

DIN 5296

RexPro Carbon Steel Chain

With RexPro, Rexnord set a new standard for quality chains. The RexPro chain is the result of further developing the
Rexnord high performance chain. Over a timespan of four years the combination of selected steels, optimised manufacturing and the RexPro lubrication have all achieved these outstanding product characteristics.

American Standard Connecting Links - Simplex Connecting Link

Deep Groove Ball Bearings - C3 Clearance

C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.

Shielded type:

With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.

Weg Frequency Inventers

The WEG CFW series of Variable Speed Drive (VSD) is intended for speed control of three-phase induction motors.
Applications: Centifugal Pumps, Process Pumps, Fans/Exhausters, Stirrers/Mixers, Extruding Machines, Conveyors, Roller Tables, Granulators, Pelletising Machines, Driers,
Rotating Ovens, Rotating Filters, Winders, Unwinding Machines, Cutting and Welding Machines.

CFW-9

The Vectrue Technology? represents a significant advancement, allowing this new generation of WEG inverters to combine V/F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques, all in one product. An innovation was also introduced to simplify applications that require braking torque. A new feature named Optimal Braking? eliminates the need for the dynamic braking resistor in some applications allowing a simpler, more compact and economical solution.

Dimensions
(H x W x D):
210 x 143 x 196mm.

Weight: 3.5kg.

VB Classical V-Belt

V-Belts to BS3790, DIN2215 and ISO 4184.



Belt Section 13A (SPA/13)