产品 / 轴承 & 滚轴
编号：NTN6857382F
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.
编号：CTT6888037Q
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 10/Z (SPZ/10)
编号：WEG6934313N
●产品描述：
W22 3 Phase Motors - A Revolution in Energy Efficiency
The W22 is a range of three-phase induction motors which reduces energy consumption, noise, vibration and cost of ownership.With an aerodynamic frame, redesigned cooling system, unique WISE insulation system and new WSeal 'V' Ring with double lip and metallic cap, the W22 range of motors is quieter, more reliable, easier to maintain and more cost effective.
Cast Iron IE3 Multi-Voltage Three Phase Motors
Cast iron frame motors - IE3 (Premium Efficiency) three-phase motors. These motors exceed the IE3 New European Minimum Energy Performance Standard (EU MEPS). Thermisters fitted as standard in frame 160 and above. IP55 protection as standard (up to IP66 on request).
编号：CTT6888047B
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 10/Z (SPZ/10)
编号：REN6901918J
●产品描述：
Duplex Chain Connecting Link
Duplex Chain Connecting Link
编号：NTN6857047F
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.
编号：OPB6882245Z
●产品描述：
SK High Power Wedge Belts
To ISO 4184, BS 3790, DIN 7753 and
USA Standard RMA/MPTA.
The wrapped Optibelt SK wedge belt has been developed with mechanical engineering in mind.
It transmits substantially more power than the classical V-belt with comparable top width.
The Optibelt SK high performance wedge belt is preferred for use in heavy mechanical engineering with very high load requirements, which can be over 2000kW.
*Belts marked are part of the S = C PLUS range with an efficiency of approximately 97% and are suitable for use and require no service or adjustment during service life.
Belt Section 17/B (SPB/17)
编号：OPB6958242W
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 10/Z (SPZ/10)
编号：SNR6816970W
●产品描述：
Tab Washers
Tab washers are used for securing KM series lock nuts. They have an inner tab for location on the adaptor sleeve. One of the external tabs is bent over a slot when used wit the
KM series lock nuts.
编号：CTT6887683Q
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 13/A (SPA/13)