产品 / 轴承 & 滚轴
编号：OPC6885555P
●产品描述：
Optibelt Timing Belts
Optibelt?s Alpha timing belts are manufactured from high grade polyurethane with steel reinforcing cords.
High precision profile for good repeatability.
Very low stretch.
Resistant to many oils and chemicals.
Wide and flexible range.
Alpha Polyurethane Timing Belts
AT-Pitch Range - AT5, AT10
编号：OPB6881062R
●产品描述：
VB Classical V-Belt
V-Belts to BS3790, DIN2215 and ISO 4184.
Belt Section 10/Z (SPZ/10)
编号：OPC6884575M
●产品描述：
Optibelt Timing Belts
Optibelt?s Alpha timing belts are manufactured from high grade polyurethane with steel reinforcing cords.
High precision profile for good repeatability.
Very low stretch.
Resistant to many oils and chemicals.
Wide and flexible range.
Alpha Polyurethane Timing Belts
T-Pitch Range - T2.5, T5, T10
编号：OPB6958018V
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 13/A (SPA/13)
编号：OPB6885221Y
●产品描述：
Super X-Power V-Belt
Moulded Cogged Raw Edge Wedge Belts
Belt Section 10/Z (SPZ/10)
编号：OPB6885022Z
●产品描述：
Super X-Power V-Belt
Moulded Cogged Raw Edge Wedge Belts
Belt Section 13/A (SPA/13)
编号：OPB6882417T
●产品描述：
SK High Power Wedge Belts
To ISO 4184, BS 3790, DIN 7753 and
USA Standard RMA/MPTA.
The wrapped Optibelt SK wedge belt has been developed with mechanical engineering in mind.
It transmits substantially more power than the classical V-belt with comparable top width.
The Optibelt SK high performance wedge belt is preferred for use in heavy mechanical engineering with very high load requirements, which can be over 2000kW.
*Belts marked are part of the S = C PLUS range with an efficiency of approximately 97% and are suitable for use and require no service or adjustment during service life.
Belt Section 22/C (SPC/22)
编号：OPC6885640X
●产品描述：
Optibelt Timing Belts
Optibelt?s Alpha timing belts are manufactured from high grade polyurethane with steel reinforcing cords.
High precision profile for good repeatability.
Very low stretch.
Resistant to many oils and chemicals.
Wide and flexible range.
Alpha Polyurethane Timing Belts
AT-Pitch Range - AT5, AT10
编号：OPB6695325D
●产品描述：
The Optibelt Laser Pointer II
The Optibelt Laser Pointer II makes it easier to align belt drives systems but adjustment via their front or side faces, respectively.
Benefits
? Fast and easy use for belt drives.
? Laser output power 5mW.
? Exact align line projection.
? Measuring of parallel and angular misalignment.
? Higher operational reliability of the drives.
? Time saving and precise measuring method.
编号：OPC6884050U
●产品描述：
Optibelt Timing Belts
Optibelt?s Omega timing belts give long lasting
high performance with a number of advantages:
Reduced noise.
Runs in both standard HTD and RPP pulleys.
High efficiency - up to 98%.
Maintenance-free.
Omega High Quality Timing Belts