Block Trolleys - Plain

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 ton models available on request.

Block Trolleys - Geared

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 & 20 ton models available on request.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 20m

Ultralift Magnetic Lifter

'Rare earth' neodymium magnet material provides light weight, high power performance. No power required which means no additional costs. Simply hook to your crane or hoist and you are ready to lift. Safety locking mechanism prevents accidental release of load. One man can attach the load, effortlessly, in seconds. Access is only required to the load's top face allowing more efficient use of your storage and handling areas.

LM2000

Flat Section;
SWL: 2000kg, Minimum Thickness: 70mm, Maximum Length: 3000mm.
Round Section;
SWL: 800kg, Maximum Diameter: 600mm, Maximum Length: 3000mm.

The Ultralift PLUS Magnet Lifter

A new unique lifting eye mechanism (patent pending) that isolates the operating handle while the load is suspended. This novel feature ensures the load will not be released while the lifter is under tension.

Every lifting magnet has a Safe Working Load (SWL) rating, which is three times less than the actual test load that the lifter has to lift before leaving the factory. This safety margin of 3:1 is there to protect the operator against adverse conditions that reduce the actual lifting performance.

Powerful - Constructed using ultra high performance neodymium magnets.
Safe - A 3:1 safety factor.
Zero running costs - Permanent magnet technology requires no energy source.
Efficient - A two man job becomes a one man job.
Flexible - 2 pole design enables use on flat and round material.
Failsafe - The NEW safety feature ensures SAFETY.
Fast - The Ultralift PLUS; safely lifts ferrous components in seconds.
Floor saving - Goods are stored closer together - access is needed to the top face only.
Gentle - Goods are not marked or damaged.

For further information, please refer to our catalogue.

The Ultralift PLUS Magnet Lifter

A new unique lifting eye mechanism (patent pending) that isolates the operating handle while the load is suspended. This novel feature ensures the load will not be released while the lifter is under tension.

Every lifting magnet has a Safe Working Load (SWL) rating, which is three times less than the actual test load that the lifter has to lift before leaving the factory. This safety margin of 3:1 is there to protect the operator against adverse conditions that reduce the actual lifting performance.

Powerful - Constructed using ultra high performance neodymium magnets.
Safe - A 3:1 safety factor.
Zero running costs - Permanent magnet technology requires no energy source.
Efficient - A two man job becomes a one man job.
Flexible - 2 pole design enables use on flat and round material.
Failsafe - The NEW safety feature ensures SAFETY.
Fast - The Ultralift PLUS; safely lifts ferrous components in seconds.
Floor saving - Goods are stored closer together - access is needed to the top face only.
Gentle - Goods are not marked or damaged.

For further information, please refer to our catalogue.

Ultralift TP Lifting Magnet

Manually operated permanent lifting magnet specifically designed for lifting thin plate and removing single sheets from a stack. Operating handle works like a car handbrake. A button on the end operates a safety catch which prevents accidental switching while a load is being held. Simply attach the Ultralift TP to the hook of your crane or hoist and you?re ready to go. Permanent magnets and manual switching mean no operating costs. A job that takes two men with hooks, chains or slings can be done with one hand using the Ultralift TP. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it?s lifted. Loads can be stored and accessed more efficiently as you only need access to the load?s top face to attach the Ultralift TP.

TP300

Specifications;
Material Thickness - 5mm;
SWL: 150kg, Maximum Length: 2000mm.
Material Thickness - 6mm;
SWL: 200kg, Maximum Length: 2000mm.
Material Thickness - 8mm;
SWL: 300kg, Maximum Length: 2000mm.
Material Thickness - 10mm;
SWL: 400kg, Maximum Length: 2000mm.

Ultralift Magnetic Lifter

'Rare earth' neodymium magnet material provides light weight, high power performance. No power required which means no additional costs. Simply hook to your crane or hoist and you are ready to lift. Safety locking mechanism prevents accidental release of load. One man can attach the load, effortlessly, in seconds. Access is only required to the load's top face allowing more efficient use of your storage and handling areas.

LM0125

Flat Section;
SWL: 125kg, Minimum Thickness: 20mm, Maximum Length: 1500mm.
Round Section;
SWL: 50kg, Maximum Diameter: 250mm, Maximum Length: 1500mm.

Ultralift TP Lifting Magnet

Manually operated permanent lifting magnet specifically designed for lifting thin plate and removing single sheets from a stack. Operating handle works like a car handbrake. A button on the end operates a safety catch which prevents accidental switching while a load is being held. Simply attach the Ultralift TP to the hook of your crane or hoist and you?re ready to go. Permanent magnets and manual switching mean no operating costs. A job that takes two men with hooks, chains or slings can be done with one hand using the Ultralift TP. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it?s lifted. Loads can be stored and accessed more efficiently as you only need access to the load?s top face to attach the Ultralift TP.

TP150

Specifications;
Material Thickness - 5mm;
SWL: 75kg, Maximum Length: 1500mm.
Material Thickness - 6mm;
SWL: 100kg, Maximum Length: 1500mm.
Material Thickness - 8mm;
SWL: 150kg, Maximum Length: 1500mm.
Material Thickness - 10mm;
SWL: 200kg, Maximum Length: 1500mm.

The Ultralift PLUS Magnet Lifter

A new unique lifting eye mechanism (patent pending) that isolates the operating handle while the load is suspended. This novel feature ensures the load will not be released while the lifter is under tension.

Every lifting magnet has a Safe Working Load (SWL) rating, which is three times less than the actual test load that the lifter has to lift before leaving the factory. This safety margin of 3:1 is there to protect the operator against adverse conditions that reduce the actual lifting performance.

Powerful - Constructed using ultra high performance neodymium magnets.
Safe - A 3:1 safety factor.
Zero running costs - Permanent magnet technology requires no energy source.
Efficient - A two man job becomes a one man job.
Flexible - 2 pole design enables use on flat and round material.
Failsafe - The NEW safety feature ensures SAFETY.
Fast - The Ultralift PLUS; safely lifts ferrous components in seconds.
Floor saving - Goods are stored closer together - access is needed to the top face only.
Gentle - Goods are not marked or damaged.

For further information, please refer to our catalogue.