Block Trolleys - Geared

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 & 20 ton models available on request.

Ultralift Magnetic Lifter

'Rare earth' neodymium magnet material provides light weight, high power performance. No power required which means no additional costs. Simply hook to your crane or hoist and you are ready to lift. Safety locking mechanism prevents accidental release of load. One man can attach the load, effortlessly, in seconds. Access is only required to the load's top face allowing more efficient use of your storage and handling areas.

LM0125

Flat Section;
SWL: 125kg, Minimum Thickness: 20mm, Maximum Length: 1500mm.
Round Section;
SWL: 50kg, Maximum Diameter: 250mm, Maximum Length: 1500mm.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 50m

Replacement RAM

To suit KEN9853500K

Vertical Hinged Lifting Clamps

Suitable for lifting, turning (180°) and vertical transfer of hot rolled structural steel plates and sections up to a surface
hardness of 300 Brinell/32 Rockwell C. Fitted with a locking device. Lifting clamps are fitted with special hook-up facilities to enable easy fitting of the clamps in the horizontal position.

NEVER Exceed Maximum Capacity.

NEVER Lift UNDER 20% Of The Rated Capacity.

Flat Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate.

Duplex Type - Double Thickness

With flat metal reinforced eye at each end. Conform to BS 3481 : Part 2.

CS Grade 8 Chain Assemblies

All general purpose slings should be rated by the uniform load method as stated. BS EN 818-4.

CS071HC 7mm Single Leg Chain Sling

Sling type: single.
Chain size: 7mm.
Load: 1.50 tonne.

Flat Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate.

Simplex Type - Single Thickness

With flat metal reinforced eye at each end. Conform to BS 3481 : Part 2.

Flat Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate.

Simplex Type - Single Thickness

With flat metal reinforced eye at each end. Conform to BS 3481 : Part 2.

Lever Hoists

3/4 to 6 ton range capacities. Closed bearing design reduces user effort and offers easy maintenance. Unique spring clutch system to hold at any desired height. New design drop forged hooks with safer tip and slowly bending performance.