Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

90 Type.

Kennedy 15mm Automatic Pipe Cutter

Robust pipe cutter that will cut copper, brass, aluminium, PVC and thin-wall conduit. Automatically tightens and cuts when turned around the pipe. The compact design makes it ideal for working in confined spaces. Capacity: 15mm.

Kennedy Aluminium Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes and nuts. Lightweight aluminium alloy handles. As robust as heavy duty cast iron wrenches. All moving parts are heat treated.

Replacement Cutting Wheels

To suit Kennedy Pipe Cutters

Drain Testing Dye

Used to locate the direction of water flow in pipies, drains etc. soluble in water. 200gm jars.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

266E

Capacity: 12.7 - 44mm. Weight: 458g. Supplied with spare cutter in the fluted handle.

Sink Waste Cleaner

Suitable for unblocking domestic waste pipes including: sinks, baths and showers. All galvanised steel for resistance to rust. 2m body with gripping handle. Corkscrew end is for dislodging and moving any obstructions.

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal

Monument Tools Automatic Copper Pipe Cutter

For work in confined spaces. Strongly made outer zinc coated metal body houses the inside mechanism made from steel which takes the load of the cut. Cuts copper pipes once the gate of the tool is closed over the pipe. Tool can be rotated in either direction. Available in 3 types: 15, 22 and 28mm capacities.