Kobe™ 1/3 Sheet Heavy-Duty Orbital Sander

FOS890
For use on wood, metal, plastics, fibreglass, fillers etc. Connects to 10mm hose, dust extraction, adjustable speed regulator, low noise, vibration damped.

Specifications:
1/4" NPT air inlet thread.
93mm x 230 sheet size.
90PSI air pressure.
4CFM* air consumption.
Overall length: 175mm.
Pad size: 165 x 90mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Tools

Kobe Air Riveter Nose Piece for use with different sized rivets.

Air Riveter Nose Piece

Kobe™ Micro Air Die Grinder

For precision grinding etc. With hose and silencer.

Specifications:
1/4" NPT air inlet thread for 5mm air hose.
90PSI air pressure,
7CFM* air consumption.
Free speed: 56,000rpm.
Sound pressure level: 76dBA.
Sound power level: N/A dBA.
Vibration level: 4.80m/s2.
Collet size: 3mm.
Overall length: 156mm.

*Based on a 15 second cycle per minute average use.

Kobe™ Extended Spindle Die Grinder

GES2506L
For extra reach in "hard to get at" areas, extended spindle housing allowing two-handed operation, rear exhaust, safety lever throttle.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 248mm.
Collet size: 6mm.

*Based on a 15 second cycle per minute average use.

Kobe? Air Hammer Chucks

Suitable for use with all Kobe air hammers. Cannot accidentally be released.

Quick Change Chuck

Spring loaded front collar, that must be pulled forward to allow tool release.

Kobe? Retainers

Suitable for use with all Kobe air hammers.

Quick Change Type

Speed Ratches

SR500
Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work.

Specifications:
13mm bolt capacity.
1/4?? NPT air inlet thread for 10mm air hose.
150rpm free speed.
90psi air pressure.
4CFM* air consumption,
50ft/lbs torque.
Front exhaust.
Overall length: 255mm.

*Based on a 15 second cycle per minute average use.

Kobe Air Ratchet Speed Wrench (1/2?? Square Drive)

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe™ Additional Collets

To suit Kobe and similar micro die grinders.

Kobe? General Duty Air Hammer & Chisel Kit

HP5040K
Supplied with flat chisel, spot weld breaker, taper punch & rivet cutter. Variable power regulator. Accepts all standard 0.401? shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 135mm.
Stroke length: 40mm.

*Based on a 15 second cycle per minute average use.