Kobe? Heavy-Duty Pistol Grip Air Hammer

HP2190
For a wide range of workshop and automotive uses. Supplied with retainer spring. Accepts all standard 0.401" shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 225mm.
Stroke length: 90mm.

*Based on a 15 second cycle per minute average use.

Kobe™ Dust Free Orbital Palm Grip Sander

FPS874
Complete with 1M dust removal hose, large capacity dust collection bag and foam-backed velcro pad. Connects to dust extraction. Adjustable speed regulator.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
93 x 230mm sheet size.
Overall length: 175mm.
Pad Size: 165 x 90mm.

*Based on a 15 second cycle per minute average use.

Kobe? Shear Head Only

Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Suitable for use with Kobe SH120 rapid cutting metal shear.

Kobe IW500 1/2" Impact Wrench

The Kobe IW500 1/2" square drive air impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it?s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas.

IW500 - 1/2" Impact Wrench

One piece aluminium housing, 10 position power regulator and thumb switch for reversing.

Specifications:
Bolt capacity: 16mm.
Torque: 325 Nm.
Air inlet thread: 1/4" NPT.
Air hose size (ID): 8mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Overall length: 191mm.
Weight: 2.4kg.
Noise level: 88dB(A).
Vibration: 4.2m/s2.
For a complete range of 1/2'' drive impact sockets see product group KEN-583.

*Based on 15 second cycle per minute average use.

NB160 High Performance Air Nibbler

NB160
Produces burr free cuts without distortion. Ideal for body shop & sheet metal work. Teasing throttle for precise control.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption
Cutting capacity: 1.6mm (steel) to 3.0mm (aluminium). Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Kobe? Saw Blades

HSS body saw blades with two tooth pitch variations. 24 tooth (medium) and 32 tooth (fine) to suit a wide range of applications. N.B. Tool not included.

Kobe™ 10mm Air Pistol Drill

DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe? Heavy-Duty Air Needle Scaler

NS4030
10 needles for quick removal of rust, paint, scale, flux & corrosion. Slimline body. Lightweight. (For replacement scaling needles, please refer to KBE-280-0019A).

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 250mm.
Needle diameter: 3mm.

*Based on a 15 second cycle per minute average use.

Kobe? Air Nibbler Punch

Produce burr free cuts without distortion. Ideal for body shop and sheet metal work. Suitable for use with Kobe NB160 high performance nibbler.

To suit Nibbler Model NB160. Cuts on upstroke.

Random Orbital Palm Sander Self-vacuum Type 6 - 11,000rpm

R5666
Suitable for shaping, blending and smoothing of body filler and rapid material removal. Random 5mm diameter orbit for a swirl-free finish - can be used for wet sanding. 150mm diameter Hook & Loop backing pad with a 600A hole pattern. 1.6 metre extraction hose. Self-generating vacuum. Can be connected to a portable dust collection system or supplied cotton bag to help reduce airborne dust and clean-up time. One handed operation with a rubber grip. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: R5666.
Backing pad size: 150mm (6").
Backing pad type: Hook & Loop.
Orbit diameter: 5mm (3/16").
Suction type: self-generating vacuum.
Spindle size: 5/16".
Free speed: 11,000rpm.
Recommended air pressure: 6.2Bar (90PSI).
Air consumption: 3CFM (85ltr/m).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Motor power: 0.25hp.
Sound power level: 76dBA.
Sound pressure/noise level: 88dBA.
Vibration level#: 5.2m/s2.
Overall length: 210mm.
Net weight: 1.47kg.

Per Pneurop Standard EN ISO15744:2002.
#Per EN 28927-3.

Action Shots:
Single handed throttle stop/start with rubber grip.
Easy change backing pad.
Adjustable air regulator.
Easy to connect hoses.
1.6 metre air inlet and extraction hose.