Kobe 180mm (7") Heavy-Duty Angle Grinder

GA1807L
Supplied with front exhaust, safety lever throttle, auxiliary side handle and adjustable safety guard.

Specifications:
Free speed: 7000rpm.
Grinding disc size: 180x6.3x22.2mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 6,1/2 CFM*
Overall length: 340mm.
Weight: 3.6kg.
Sound power level: 109dB(A).
Sound Pressure/ Noise level: 103dB(A).
Vibration level: 2.6m/s.

*Based on a 15 second cycle per minute average use.

Kobe™ Angle Die Grinder

GDA2206L
Safety lever throttle, reverse exhaust, Ideal for polishing, grinding & buffing. suitable for use in confined areas.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length 160mm.
Collet size 6mm.

*Based on a 15 second cycle per minute average use.

Kobe? Air Hammer Chucks

Suitable for use with all Kobe air hammers. Cannot accidentally be released.

Safety Chuck

Spring load retainer, that must be unscrewed to allow tool release.

Kobe™ Surface Conditioning and Finishing Kit

Multi-purpose kit containing:
one of each of the following surface preparation discs - fine, medium & coarse.
2x abrasive disc grades - P36, P60, P80 & P120.
1x 6mm diameter shank to fit the backing pad.
One Kobe angle die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption.
Supplied in a sturdy plastic carry case.

*Based on a 15 second cycle per minute average use.

Kobe? Saw Blades

HSS body saw blades with two tooth pitch variations. 24 tooth (medium) and 32 tooth (fine) to suit a wide range of applications. N.B. Tool not included.

Straight Continuous Use Die Grinder 1/4? - 25,000rpm

B3456
Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4? collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3456.
Drive size: 1/4? (6mm), 1/8? (3mm).
Free speed: 25,000rpm.
Air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level?: 91dBA.
Sound power level?: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 160mm.
Weight: 0.6kg.

? Per Pneurop Standards EN 12366.
# Per EN 28927-1.

Action shots:
Vibration dampened rubber grip.
Adjustable air(speed) regulator.
Lever operated throttle with safety clip.
Comes with 1/4? and 3/8? collet spanners.

Kobe Industrial Air Tools

The Kobe IWS500 is a tough industrial air impact wrench, with a 10 position power regulator and thumb switch for selecting reverse. Fully polished single piece aluminium housing with bump guards.

IWS500 1/2" Impact Wrench Kit

IWS500 spefication:
Drive: 1/2''Sq
Working maximum Torque: 325 Nm
Operating pressure: 90psi
Air inlet thread: 1/4'' NPT for 10mm air hose.
Air consumption: 4CFM*.
Bolt capacity: 16mm.
Overall length: 191mm.
Free speed: 7,000rpm.
Noise level: 93dB(A).
Vibration: 1.21 m/s2.

Set includes:
1/2'' impact wrench.
10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm.
Threaded tailpiece, in-line mini-oiler and oil bottle.
Kit supplied complete in robust blow-moulded case.

*Based on a 15 second cycle per minute average use.

Kobe? Straight Air Screwdriver Kit

SS1525K
Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
10 - 30lbs/inch torque.
Overall length 210mm.
1/4?? hex drive capacity.

Contents:
SS1525 screwdriver, with three clutch springs, 2 spanners, clutch adjusting wrench, 1/4" NPT nipple. Mini oil bottle, No.1 x 65mm crosspoint double ended bit, 5 x 50mm slotted bit.

*Based on a 15 second cycle per minute average use.

Kobe Pistol Air Screwdriver Kit

SP1825K
Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
45 - 115lbs/inch.
Overall length: 178mm.
1/4" hex drive capacity.

Contents:
SP1825 screwdriver.
Hexagon wrench and spanner.
No.1, 2 & 3 x 50mm crosspoint bits.
4, 5 & 6mm x 50mm slotted bits.
No.2 x 100mm crosspoint double-ended bit.

*Based on a 15 second cycle per minute average use.

Kobe™ 3/4" Square Drive Air Impact Wrench

IW750
One piece aluminium housing, 10 position power regulator, thumb switch for reversing.

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
25mm bolt capacity.
90psi air pressure.
7.5CFM* air consumption.
500ft/lbs torque.
Noise level: 83dB(A).
Vibration: 0.449m/s.
Overall length: 245mm.

*Based on a 15 second cycle per minute average use.