2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.

The new MicroGauge 2-point bore-gauging system has been designed specifically for the measurement of small bores between 1.0 - 6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005 mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

MicroGauge 2-point Bore Gauge Set

Features:
• System range: 1-6mm
• New slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output : RS232 / USB proximity sensor
• Linearity : Diameter 1.0-1.5 max 2% of measuring travel,
min 0.001mm. Diameter 1.5-6 max 1% of measuring travel, min
0.001mm
• Repeatability : 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option

3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).

3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).

Oxford? Precision 3 Point Internal Micrometer Sets

Designed to self-centre, for accurate measuring of bores. Extension rods for measuring 170mm deep on 11-20mm and 220mm deep on 20-40mm. Satin finish, fitted with knurled ratchet stop.



Contents: Micrometers: 11 - 14mm, 14 - 17mm, 17 - 20mm. Calibration Ring: 11 & 17mm. Slotted Screwdriver. Spanners x 2.

Oxford 3 Point Bore Micrometers

Designed to self-centre, for accurate measuring of bores.
Extension rods for measuring 170mm deep on 11 - 20mm and 220mm deep on 20 - 40mm.
Satin finish, fitted with knurled ratchet stop.

2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).

The new MicroGauge 2-point bore-gauging system has been designed specifically for the measurement of small bores between 1.0 - 6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005 mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

MicroGauge 2-point Bore Gauge Set

Features:
• System range: 1-6mm
• New slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output : RS232 / USB proximity sensor
• Linearity : Diameter 1.0-1.5 max 2% of measuring travel,
min 0.001mm. Diameter 1.5-6 max 1% of measuring travel, min
0.001mm
• Repeatability : 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option