产品 / 精密量仪 / 3点式内径测量
品牌
18-35mm DIAL BORE GAUGE

18-35mm DIAL BORE GAUGE

编号:OXD3151400K
●产品描述:
Oxford Precision™ Dial Indicating Bore Gauges

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A datum point' can be set by using a setting ring of a known diameter or a micrometer. Zero' the gauge to this datum point by rotating the bezel to align zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have interchangeable anvils to cover a range of bore sizes.



XTA50M 50-65mm BORE MICROMETER

XTA50M 50-65mm BORE MICROMETER

编号:BOW3355609M
●产品描述:
2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).



XTA6M 6-8mm BORE MICROMETER

XTA6M 6-8mm BORE MICROMETER

编号:BOW3355601M
●产品描述:
2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).



SXTA5M BORE MICROMETER SET

SXTA5M BORE MICROMETER SET

编号:BOW3355724M
●产品描述:
3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).



REPLACEMENT ANVILS TO SUIT OXD3151500K

REPLACEMENT ANVILS TO SUIT OXD3151500K

编号:OXD3985102K
●产品描述:
Spare Anvils Oxford Dial Indicating Bore Gauges

To suit Gauge Size: 50 - 160mm

Metric Gauge Sizes

XTA20M 20-25mm BORE MICROMETER

XTA20M 20-25mm BORE MICROMETER

编号:BOW3355606M
●产品描述:
2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).



REPLACEMENT ANVILS TO SUIT OXD3151100K (PK-11)

REPLACEMENT ANVILS TO SUIT OXD3151100K (PK-11)

编号:OXD3985105K
●产品描述:
Spare Anvils Oxford Dial Indicating Bore Gauges

To suit Gauge Size: 2.0 - 6.0`

Inch Gauge Sizes

XTA35M 35-50mm BORE MICROMETER

XTA35M 35-50mm BORE MICROMETER

编号:BOW3355608M
●产品描述:
2/3 Point Bore Micrometers - Analogue

Economical range of mechanical three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring head and setting ring are UKAS calibrated (6-200mm range only).



20-40mm 3 POINT INTERNALMICROMETER

20-40mm 3 POINT INTERNALMICROMETER

编号:OXD3352510K
●产品描述:
Oxford? Precision 3 Point Internal Micrometer Sets

Designed to self-centre, for accurate measuring of bores. Extension rods for measuring 170mm deep on 11-20mm and 220mm deep on 20-40mm. Satin finish, fitted with knurled ratchet stop.



Contents: Micrometers: 20 - 25mm, 25 - 30mm, 30 - 35mm, 35 - 40mm. Calibration Ring: 25 & 35mm. Slotted Screwdriver. spanners x 2.
SXTA8M BORE MICROMETER SET

SXTA8M BORE MICROMETER SET

编号:BOW3355727M
●产品描述:
3-Point Bore Micrometer Sets - Analogue

Economical range of mechanical two and three point micrometers with XT (extended travel) feature on all models between 6 - 200mm capacity. This allows a wide measurement range without the need to change anvils. Both the measuring heads and setting rings are UKAS calibrated (6-200mm range only).