Dinse Type Cable Plugs & Sockets

With positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint. Dinse compatible panel sockets and machine/surface mounted plugs & sockets also available.

Dinse Type Cable Plugs & Sockets

With positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint. Dinse compatible panel sockets and machine/surface mounted plugs & sockets also available.

Crocodile Type Electrode Holders

Designed to reduce fatigue to a minimum and increase safety. The holder is fully insulated.

Myking Rubber Grip Electrode Holders

One of the best quality electrode holders available. Comprises of only only 3 parts and incorporates design advantages such as correct weight and balance, excellent hand-grip, and double screwed cable connector. Excellent insulation, requires a minimum of maintenance and has two electrode positions 45° and 90°.

Cemont Type 17V TIG Torch

For use with power source model number TX150DC illustrated.

Cemont Portable Professional MMA/Tig Inverter Power Source

Heavy duty single phase inverter MMA/Touch Tig machine, for general purpose use. Features include robust front and rear profiles in tough ABS plastic to protect from accidental damage, hot start and anti-stick device. This machine is ideal for maintenance and on site fabrication.

Specifications:
Welding current range: 5 - 130amps.
Duty cycle: 50%: 125amps.
Weldable electrodes: 1.6 - 3.25mm.
240V single phase.
2 year warranty.
Dimensions (L x W x H): 145 x 235 x 340mm.
Weight: 7.7kg.

Puma S1400 Portable Professional MMA/Tig Inverter Power Source (Replaces S1401)

Smarty TX160Alu

Heavy-duty single-phase inverter AC/DC T.I.G. / M.M.A. machine, for general-purpose use. Features include robust ABS plastic case to protect from accidental damage, T.I.G. pulsing on DC, wave balance and frequency control on AC, H.F. start, slope out, 2/4 latching, remote facility, hot start and Anti stick device. Simple controls for welding cycle control for post gas, down slop and post gas. Ideal for production, maintenance and on site fabrication.
Input Voltage: 240 volt 16amp
Welding Current Range: 5-150amps
Duty Cycle: 120amps @ 60%
Supplied with: TIG Torch, Earth lead, and Regulator
Optional Foot Pedal Available

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Cemont Type 9V TIG Torch

For use with power source model number S1400 illustrated.

Reusable Lugs

With arc cable.