SIP Hi-Tech ARC Inverter Welders

With anti-stick circuit to ensure a stable arc whilst maintaining optimised welding parameters. Ideal for a wide range of applications, including fabrication, general and auto repairs, agricultural repairs and on-site welding. Superb build quality and extremely easy to use, but with an exceptionally high duty cycle. These models are complete with electrode holder, 3m cable and 3m earth lead. They are also covered by 2 year warranty. All of these models are generator friendly.

Weldmate P267 ARC Inverter Welder

05252
230V (27amp) supply.
260amp @ 60% duty cycle.
20 - 260amp current range.
1.6 - 5mm rod diameter.
Weight: 8.5kg.

Kennedy Tig Torch Accessories

Fully compatible with most brands of Tig torches.

Standard Collet Bodies

10N_ _ To suit WP17/18/26 torches.

Kennedy Gas Lens Body 45N__

45V24/25/26/27 To suit WP17/18/26 torches.

Dinse Type Cable Plugs & Sockets

With positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint. Dinse compatible panel sockets and machine/surface mounted plugs & sockets also available.

90° Welding Angle Clamp

One man set up and operation, made from cast iron, copper plated spindle for spatter protection, T-Handle enables high pressure for secure clamping, easy fixing to a work bench
or machine tool table.
Size: 90mm x 90°.
Weight: 10.5kg.

SIP® Hi-Tech High Frequency TIG/ARC Inverter Welders

For the more professional user, these inverter welders include a dual function for Arc welding (with anti-stick circuitry) and high frequency DC Tig facility (with easy start). All models also include 10amp extra-low-current performance for fine work. They give precision welding on mild and stainless steel, alloy steel, copper and bronze in Tig mode. Supplied complete with Arc/Tig accessories and holder/torch, plus covered by a 2 year warranty.

Weldmate P177HF AC/DC TIG/ARC Inverter Welder

05162
230V (11amp) supply.
160amp @ 60% (TIG) 140amp @ 60% (ARC) duty cycle.
1.6 - 3.2mm rod diameter.
Latching system for 2 touch/4 touch control.
Supplied with 4M (SR17) TIG torch.
Weight: 26kg.

Earthing Clamps

To complete an arc welding circuit, a return current lead must be used to securely connect the workpiece and the power source.

Twist Grip Short Stub Electrode Holders

Reduce fatigue and increase safety. All of the electrode is available for use and the angle allows the hand to remain away from the weld pool. The handle applies torque to the electrode clamp in the head.

Kennedy Gas Lens Ceramics

54N_ _ To suit WP17/18/26 torches.

Kennedy Gas Lens Ceramics

54N_ _ To suit WP17/18/26 torches.