Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Taper

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Parallel

Pneumatically Operated Valves

Series: 3
Function: 3/2
Port: 1/8
Actuation - Return: Pilot Pilot

Pneumatically Operated Valve - Pilot Pilot

Kennedy® Solenoid Actuated Spool Valves - KVR

General purpose spool valves. Media compressed air & neutral gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & spool: aluminium.
Seals: nitrile.
Endcaps: glass filled polyester.
Seal spacers: PPS.

SMC AN203-02 Series Silencer

Over 25dB(A) noise reduction.
Space saving
Compact style.

AN203-02 Specification:
Port size: 1/4.
Effective area (mm2): 15.
Fluid: Compressed Air.
Max. operating pressure: 1.0MPa.
Noise reduction: 25dB(A).
Ambient and fluid temperature: 5 to 60C.
Weight: 3g.

Body Ported Manifolds

Suitable valves for these manifolds: SY**20 types.

Kennedy® Solenoid Actuated Spool Valves - KVR

General purpose spool valves. Media compressed air & neutral gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & spool: aluminium.
Seals: nitrile.
Endcaps: glass filled polyester.
Seal spacers: PPS.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Straight Adaptors

Connects a threaded pipe to a plain pipe end to end.

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Filtermist Filters

Filter Roll Media
For filtering machine tool coolants and cutting and lubricating fluids found throughout the metalworking industry. To suit most flat bed filter boxes. Length: 100m

Vicose Paper Filter Rolls