Bosch Rexroth Pneumatic Fittings

Cylinder, ISO 15552, series PRE.
Available in a range of piston diameters: 32-125mm
Ports: G 1/8 ? G 1/2
Double acting with magnetic piston and cushioning: elastic.
Integrated rear eye, piston rod with external thread.

For further specification on this product please see the attached PDF under the additional information tab.

PRE Series Piston Rod Cylinders

For further specification on this product please see the attached PDF under the additional information tab.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Nylon Hoses

Rigid unplasticised nylon pipe. Supplied in 3 metre lengths.

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1560 Male Stud Swivel

PCL "100 Series" Airline Coupling Adaptors

Case hardened with hard wearing passivate finish. For use with '100 Series' type couplings.

Integral Tailpiece (non-threaded)

Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Female DIN, O-Ring Swivel, 24Cone, Heavy Series, 90 Swept Elbow

Type FDHORX90

Auto-Switches

Auto Switches

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Taper

Pressure Gauges

All Centre Back Connectors

Pressure Gauges

Blanking Plate Assemblies

For use in situations where valves may be added in future.

Camozzi Equal Tees

7540
Super-rapid compact fitting Technopolymer equal tube Tee.
Available in 4, 6, 8, and 10mm tubes.