Camozzi Swivel Branch Tees

7432
Super-rapid compact fitting Technopolymer swivel branch Tee with O-ring assembled.
Available in:
4mm tube, G1/8 thread.
4mm tube, M5 thread.
6mm tube, G1/8 thread.
6mm tube, G1/4 thread.
6mm tube, M5 thread.
8mm tube, G1/8 thread.
8mm tube, G1/4 thread.
8mm tube, G3/8 thread.
10mm tube, G1/4 thread.
10mm tube, G3/8 thread.
12mm tube, G1/4” thread.
12mm tube, G3/8” thread.
12mm tube, G1/2” thread.
16mm tube, G1/2” thread.
16mm tube, G3/4” thread.

EFG5K

Recommended extremely high pressure and high impulse applications such as hydrostatic transmission. Rated to 5,000psi

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RSM Series Bulkhead Connector Pneumatic Fitting

Standard Metric M5-G Bulkhead Connector push fit pneumatic fitting for compressed air hoses: 4 to 12mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Elbow Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Rexroth Straight Push-In Reducers

QR1-RED Series
Pin bushing push-in straight reducers.
Available in sizes:
6mm-4mm.
8mm-4mm.
10mm-6mm.
10mm-8mm.
12mm-8mm.
12mm-10mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95bar/10bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Straight Compression Fittings

Straight connectors for use on plain joints.

PCL ?Standard? Airline Couplings

The 'Industry Standard' coupling. For use with air tools, garage, industrial air line supplies and test panels. Free air flow rate at 7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated all steel construction, finished in hard wearing passivate. Stainless steel springs and balls. Positive single locking action prevents accidental dislocation. For fixed applications - for couplings for trailing hoses see 'Vertex' type below.

Male Threaded

3/8" BSPT.

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Male Threaded Tailpieces

For connecting a hose to a female threaded fitting.

Mounting Accessories

Double Knuckle Joint

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.